Archer MR600 v2 manual band selection giving error code:89534 no available band
![](/avatar/avatar-17.png)
Hi,
Please help me. how to manually select band. Because its keep on toggling from 4g+ to 4g network.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
![](https://static-community.tp-link.com/icon/8948432f591c4d71b5d8508983a0435f.jpeg)
Hi, As the error code 89534: no available band when you try to manually select the LTE bands on 3G/4G routers, here are useful suggestions shared by our users.
1. If you are using external antennas, such as LPDA and OMNI type, please pay attention to the LTE frequency of the external band since they might be out of the LTE frequency range on 3/4G routers, and please try to select LTE bands under the original antennas.
like #5 Jprathap mentioned here:
2. Turn off mobile date under Basic>internet>mobile data or Advanced>network>internet>mobile data; then try to select the LTE bands again.
like #21 mib896 suggested here:
3. If your LTE gateway(like MR150 v2) does not support manual band selection yet, please install the beta firmware on this link:
[Solution] Manual Band Selection for 4G WiFi Routers
4. If your issue actually is: Archer MR600 V2 was working before, then after a reboot, it cannot use the 4G network anymore.
Under 4G preferred mode, it only connects to WCDMA which is a 3G network(if the carrier doesn't support 3G anymore, the internet will not work). When trying to change Network Mode to 4G Only and save it, Error Code 1: Internal Error pops up, Besides, when searching 4G band manually, it shows "error code:89534 no available band"
Please refer to the solution on this link:
[Solution] No connection in 4g after reboot
While in case your case is related to neither of them, please feel free to start a new thread with more details about your issue!
Thank you very much.
- Copy Link
- Report Inappropriate Content
Same issue here. Any help would be much appreciated.
- Copy Link
- Report Inappropriate Content
in Airtel i can manually select bands. getting error code on jio network.
- Copy Link
- Report Inappropriate Content
Can I have a picture of the error message?
If possible, could you please send me a picture of the advanced>status page, and please also send the system log to me;
If putting the JIO sim into the mobile phone, could it stay on 4G+?
Thank you very much.
- Copy Link
- Report Inappropriate Content
@TP-Link HI, please check your mail I shared all required things.
- Copy Link
- Report Inappropriate Content
@TP-Link Getting same problem with jio sim.
"Error code: 89534 No available band"
My router - TL-MR6500v
Here is a screenshot (valid for a week or so)
https://paste.pics/f493e415ec7df29a6cb961373df2e364
Selecting band is important for LDPA antenna ! Please fix
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi all,
I sorted out the issue. actually the tp-link router does supports manual band selection on jio network. But whoever using external antenna like LPDA and OMNI type. check the operational frequency range of the antenna.
In my case i have LPDA 12dbi external antenna which supports 698-2700MHz range of frequency and in jio network 4G+ CA, downlink frequency is 2310MHz and uplink frequency is 3874.10MHz. that is why we cannot able to select the bands manually. If i check the same with default tp_link antenna i can able to select the bands. I tried and its working.
Tips to check UL and DL frequency: insert the sim on your android mobile and place your mobile at 4G+ stable network area. install cellular-pro app from play store it will help you to find the frequency range of your ISP network.(LTE-->cell params--> frequency DL/UL(mhz) ).
@TP-Link no replies from you and your team. Hope atleast in future you guys able to help me fix the issue on time.
- Copy Link
- Report Inappropriate Content
@Jprathap Awesome, I have gone ahead and tested with ABONIX 4G LTE External Barrel Antenna, it is working.
So, external antenna is working but there is a simple way of accessing.
Step 1 - Disconnect your Internet every time you are going to search the Band.
Step 2 - Try searching the band, sometimes you may need to move it to auto or manual and search again.
Now, here is the best part :
Do not select a single band, select all. Since, the time I have selected all the bands I'm getting amazing speed.
Latest Speed test results (taken after above stats) - Manual band
Automatic Band - Speed test results
Final test, putting it on Manual band (Working only when Mobil data is disabled and then search)
Signal Decreased
- Copy Link
- Report Inappropriate Content
No manual band selection even after connecting 12 dBi barrel antenna from abonix.
Same error code - 89534 no available band.
- Copy Link
- Report Inappropriate Content
@Jprathap even I am also facing some problem plz help me
- Copy Link
- Report Inappropriate Content
![](/avatar/avatar-17.png)
Information
Helpful: 2
Views: 10720
Replies: 30
Voters 1
![voter's avatar](/avatar/avatar-6.png)