MR200(EU) V4 does not have g3/G4 Backup (fallover) option

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

MR200(EU) V4 does not have g3/G4 Backup (fallover) option

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
MR200(EU) V4 does not have g3/G4 Backup (fallover) option
MR200(EU) V4 does not have g3/G4 Backup (fallover) option
2021-04-22 08:42:31
Model: Archer MR200  
Hardware Version: V4
Firmware Version:

This is very odd.  I thought V3 and above had this option (my box says v4).  So I did some digging (https://www.tp-link.com/uk/support/faq/2719/) and it seems you need to set it to Wireless Router Mode, not 4g/3G router mode.  Ime a little confused.  Thought the whole point of the backup was to fall over to $G/3G if the upstream lan did not work (so you plug one of the 4j45 ports from the cable model into any of the rj45 ports on the back). 

 

Can someone please help me understand, my head is spinning ;).

 

Ben

  0      
  0      
#1
Options
1 Reply
Re:MR200(EU) V4 does not have g3/G4 Backup (fallover) option
2021-04-23 09:27:05

@ftwig 

Hi, the default mode on the Archer MR200 Is on the 3/4G modem router mode so there is no need for 3G/4G Backup failover;

And the 3/4G backup Is via a 3/4G USB modem, not a SIM card anymore;

Thank you.

  0  
  0  
#2
Options