New Release Onemesh Firmware for Archer AX10
Hello everyone,
The Onemesh firmware for Archer AX10 is now available, customers who own the router can update the firmware to enjoy the mesh network with the range extender/powerline extender.
Customers can check for the new firmware on the router web GUI or via the Tether app, they can also download the firmware from the TP-Link official website to upgrade the router manually.
Note: Please check the device label to verify the country code and hardware version of your device first, and choose the correct file to download and install.
If you have already connected a range extender to the AX10 network, check this guide to re-build them into Onemesh network:
https://www.tp-link.com/support/faq/2509/
Release note for the firmware:
New Features/Enhancement:
1. Added OneMesh feature;
2. Updated IPTV Profile;
3. Added System Time feature on Tether App;
4. Added QoS Schedule feature;
5. Added a prompt when the negotiation rate of the WAN port is 100Mbps;
6. Optimized the Parental Control feature;
7. Added dual NAT detection and Internet Online time feature on Tether App;
8. Maximum number of clients on the single-band network increased to 128;
9. Added IPTV feature on Tether App;
10. Optimized the Client List;
11. The wireless default encryption method is modified to WPA2+AES.
Bug Fixed:
1. Fixed the FragAttacks vulnerabilities;
2. Fixed the bug that the router incorrectly blocked Internet requests;
3. Fixed the potential shell illegal injection risk of the read and write instructions of the tddp module;
4. Fixed the display error on Network Map page in some cases;
5. Fixed the bug that TKIP encryption was not supported under 11ax only mode;
6. Fixed the bug that Web UI cannot synchronize the operation of deleting UPNP entries;
7. Fixed the bug that the PPTP VPN server feature can't be enabled and the account can't be deleted in some cases;
8. Fixed the bug that the router failed to save system log in AP mode;
9. Fixed the bug that AX10-TDDP causes RCE vulnerabilities;
10. Fixed uhttpd Directory Traversal vulnerabilities;
11. Fixed the bug that Tether app failed to show the IP address in some cases;
12. Fixed the bug that the client type cannot be changed on the Tether App;
13. Fixed the bug that client icon can't be set to other on Tether App.
Do let the community know if there is an issue.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thank you. But when? And can I flash to global version?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@dcrivella dont expect too much as this is only the lowest entry wifi 6 router.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Tp- Link Archer AX3000
Hello, good morning, I apologize for my English, my native language is Spanish, I come here to expose a problem with my Tp-Link AX3000 Router, I have recently bought it and I realized that the interface when configuring the QoS is different that in my previous router (TL-WR741N I want to add that I feel more comfortable with this interface configuring the bandwidth control than with the new Qos interface of my new router.). I want to limit the bandwidth control and leave some 3 Mgbs clients and I keep the rest of the connection, which is 10 Mgbs, but by setting the maximum egress bandwidth and the max Ingress bandwidth, and I select the clients that I want to have priority, the others continue to receive all the bandwidth as if I had not configured anything. I did the configuration by following these steps https://www.tp-link.com/ve/support/faq/2693/
Questions important please read:
1.- do you think this firmware works with my TPlink Archer AX3000 to set this, to make clients have 3Mgbs and I have priority 10 Mgbs?.
(this is my version firmware 1.0.4 Build 20200426 rel.69563(5553) and version model Archer AX3000 v1.0)
PS: I have already deselected the priority in the devices that I do not want to have priority and they still consume all the bandwidth.
2.- Can you show me a screenshot with the QoS options in your AX router with this firmware, to compare it with the one that mine brought from the factory?
- Copy Link
- Report Inappropriate Content
@JuanElDiablo @Jixiang @dcrivella
The Onemesh firmware for the Archer AX10(EU)_V1.2 has not been officially released yet, you can download the latest version from the download link we updated on the original post.
- Copy Link
- Report Inappropriate Content
@Kevin_Z my router had trouble with 2.4GHz when up to FW in pos, and i can't go back old FW.
My device is IP camera. when check in device list then connected but i can't ping and access to it.
When i use other AP connect to LAN of AX10 and camera connect to 2.4GHz of AP then camera working ok.
- Copy Link
- Report Inappropriate Content
Hi, I live in Serbia and have got the brand new AX10 (EU) yesterday. Serbia is part of Europe, but not in the EU and I would like to update to latest US firmware version. Is this possible or will it brick my device? Thank you! My device has hardware revision 1.20.
- Copy Link
- Report Inappropriate Content
Why do you want to update to the US version? That's not suggested. You can install the firmware we provided in the OP, there is the latest version for AX10EU v1.20.
- Copy Link
- Report Inappropriate Content
May I know what's the model number of the IP Camera? Was it connecting fine to the AX10 2.4G network before the firmware update? You can try to disable Smart Connect feature first, then change some wireless settings for the 2.4G network, such as choosing different wireless channel, channel width can be 20MHz, reboot the router and reconnect the IP camera to check if it can connect.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 23169
Replies: 113
Voters 0
No one has voted for it yet.