New Release Onemesh Firmware for Archer AX10
Hello everyone,
The Onemesh firmware for Archer AX10 is now available, customers who own the router can update the firmware to enjoy the mesh network with the range extender/powerline extender.
Customers can check for the new firmware on the router web GUI or via the Tether app, they can also download the firmware from the TP-Link official website to upgrade the router manually.
Note: Please check the device label to verify the country code and hardware version of your device first, and choose the correct file to download and install.
If you have already connected a range extender to the AX10 network, check this guide to re-build them into Onemesh network:
https://www.tp-link.com/support/faq/2509/
Release note for the firmware:
New Features/Enhancement:
1. Added OneMesh feature;
2. Updated IPTV Profile;
3. Added System Time feature on Tether App;
4. Added QoS Schedule feature;
5. Added a prompt when the negotiation rate of the WAN port is 100Mbps;
6. Optimized the Parental Control feature;
7. Added dual NAT detection and Internet Online time feature on Tether App;
8. Maximum number of clients on the single-band network increased to 128;
9. Added IPTV feature on Tether App;
10. Optimized the Client List;
11. The wireless default encryption method is modified to WPA2+AES.
Bug Fixed:
1. Fixed the FragAttacks vulnerabilities;
2. Fixed the bug that the router incorrectly blocked Internet requests;
3. Fixed the potential shell illegal injection risk of the read and write instructions of the tddp module;
4. Fixed the display error on Network Map page in some cases;
5. Fixed the bug that TKIP encryption was not supported under 11ax only mode;
6. Fixed the bug that Web UI cannot synchronize the operation of deleting UPNP entries;
7. Fixed the bug that the PPTP VPN server feature can't be enabled and the account can't be deleted in some cases;
8. Fixed the bug that the router failed to save system log in AP mode;
9. Fixed the bug that AX10-TDDP causes RCE vulnerabilities;
10. Fixed uhttpd Directory Traversal vulnerabilities;
11. Fixed the bug that Tether app failed to show the IP address in some cases;
12. Fixed the bug that the client type cannot be changed on the Tether App;
13. Fixed the bug that client icon can't be set to other on Tether App.
Do let the community know if there is an issue.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
IP camera model IPC-K15 of Dahua.
I don't use Smart Connect feature, before ip camera connect normal.
I had try before but not work.
- Copy Link
- Report Inappropriate Content
Please ensure the camera firmware is the latest.
Just to confirm, are you able to find the 2.4G network of the AX10 when trying to connect the IP camera to the network? Are all other 2.4G clients still connecting fine? You can try to reset the router and reconfigure it from scratch if that's acceptable, we can escalate the case to the support engineers if the issue persists after that.
- Copy Link
- Report Inappropriate Content
i re-up fw and re-config then ip camera work ok.
I will follow up, if there are any problems, I will reply.
Thank!
- Copy Link
- Report Inappropriate Content
@Kevin_Z Hey Kevin, the recent one mesh firmware update has caused my router to cap my speed to 100 Mbps auto-negotiation. The issue is not fixed even after force setting to 1000 Mbps full-duplex causes my internet to disconnect and flashes the internet light orange periodically. Pls help me look at my recent post.
I think downgrading is my only option here but I cannot downgrade
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Kevin_Z I have updated the Archer AX10(EU)_V1.2 to the latest version Archer AX10(EU)_V1.2_210513 via router firmware update section by pressing check update and got updated to last version.
Now WAN is 100MB Full Duplex instead of 1000MB Full Duplex, and the router is set to AUTO NEGOTIATION, if i manually set to 1000MB Full Duplex, the port is not connecting to the internet at all, i have tried with several new cables and is acting the same, on AUTO NEGOTIATION is working on 100MB Full Duplex and if i set manually to 1000MB Full duplex doesn't work at all.
I have factory reset the router 3 times, and the problem persist, not fixed.
This is a firmware bug.
- Copy Link
- Report Inappropriate Content
Thanks for reporting to the community. The tech team was made aware of your issue. They will likely reach out to you via email to continue to troubleshoot your issue.
- Copy Link
- Report Inappropriate Content
@Kevin_Z it is absurd that I buy this router thinking it supports onemesh and it doesn't. I find myself not able to return this thing. EU v1.2 version here and need onemesh within the week. What other models sold in Europe DO support onemesh for sure? I can't ask the seller which HW version they are selling.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Pandita_din AX10 v1.20 EU version officially supports onemesh, check in router's page on Advanced tab for update, or by Tether APP on Android phone. I already updated the router and made onemesh with RE305 v4, and is working fine.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 23148
Replies: 113
Voters 0
No one has voted for it yet.