This Article Applies to:
Onemesh routers, such as Archer C80, Archer VR2100, Archer MR600
Some customers may find that they cannot set up a OneMesh Network between Onemesh routers and TL-WPA8631P KIT, and they confirm the router firmware is up-to-date, and it does support Onemesh. However, when they login to the 8631P's web interface to add it to the Onemesh network, it reports that the router is not OneMesh compatible. This article aims to provide a solution to solve the issue.
We here provide a beta firmware for the TL-WPA8631P, customers can install this beta version, then try to join it to the Onemesh network again.
Note: Please check the device label to verify the country code and hardware version of your device first, and choose the correct file to download and install.
If you still cannot add the WPA8631P to the Onemesh network, we encourage you to report the issue by emailing firstname.lastname@example.org with the subject of [TP-Link Forum 268456] TL-WPA8631P Failed to Join OneMesh Network of Onemesh Routers. Be sure to provide the following information:
1. Model of the Onemesh router;
2. Router hardware and firmware version;
3. TL-WPA8631P's hardware and firmware version.