TL-WPA8631P Fails to Join OneMesh Network of Archer VR1200
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
HELP!
I have just replaced my BT modem router with a Archer VR2100 and none of my brand new (5 of them) TL-WPA8631 devices will allow me to OneMesh with the router.
On the Onemesh option page of the TL-WPA8631 (web GUI) it says that the router doesn't support OneMesh. That's rubbish, of course, as it does according to TP-Link. That's why I purchased them, and the router.
On the VR2100 Gui, the TL-WPA8631P devices all show as available onmesh devices, but when I try and add them on that page I get a popup error that says "Error code 1 : Internal Error"
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello,
For customers who met the similar issue, here is related firmware for WPA8631P V3 which resolved this issue, please give it try and feel free to let us know it works for your.
[Solution] TL-WPA8631P Failed to Join OneMesh Network of Onemesh Routers
https://community.tp-link.com/en/home/forum/topic/268456
If the above does not work, -can you share with us a photo of the Error and also let me know the Build number of your VR2100.
-May I know how many power line units do you have in total, a TL-WPA8631KIT? Thank you
- Copy Link
- Report Inappropriate Content
@Solla-topee no difference at all!
- Copy Link
- Report Inappropriate Content
Hello,
For customers who met the similar issue, here is related firmware for WPA8631P V3 which resolved this issue, please give it try and feel free to let us know it works for your.
[Solution] TL-WPA8631P Failed to Join OneMesh Network of Onemesh Routers
https://community.tp-link.com/en/home/forum/topic/268456
If the above does not work, -can you share with us a photo of the Error and also let me know the Build number of your VR2100.
-May I know how many power line units do you have in total, a TL-WPA8631KIT? Thank you
- Copy Link
- Report Inappropriate Content
@Solla-topee this seems to have solved the problem. Thanks.
I assume this will be posted as your support download default? I can imagine that there will be many others with the same problem and wouldn't want others to waste their time on this as I've had to.... :-)
- Copy Link
- Report Inappropriate Content
@Solla-topee BTW, I have 3 TL-WPA8631KITs and 2 TL-WPA8631P and one RE605X
Re the VR2100 Firmware Version:1.4.0 0.9.1 v009e.0 Build 201122 Rel.72659n Hardware Version:Archer VR2100 v1 00000000
- Copy Link
- Report Inappropriate Content
It's great idea, we will forward your feedback to related team for evaluation.
- Copy Link
- Report Inappropriate Content
I spoke too soon!
Each of the wpa8631p devices shows themselves as belonging to the Mesh Network but the VR2100 router doesn’t (now) show the clients. I have tried rebooting the router, no difference. The HW and version of the VR2100 is on the bottom of the second image, before you ask….
Also, the Tether app on my mobile phone (Samsung S20 Ultra, up top date Android 11) shows no mesh devices either.
The VR2100 seems to have rebooted or at least restarted as we’ve lost internet connectivity here on at least one occasion. That’s unusual. Not a provider problem as my PC, which has a LAN connection to the VR2100 showed no (LAN) network when I went to look at it….
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@AllanB I have a similar type of problem with my VR600 & two TL-WPA8631P devices. I have found that this procedure works for me, so it may work for you too.
Individually log into the web interface of each TL-WPA8631, click the OneMesh tab then un-click the "Join OneMesh" button to take them out of whatever OneMesh network they think that they are in. Once it has saved the settings, physically unplug each TL-WPA8631 device for a few seconds (also make sure nothing is back-powering it through its pass-through socket). Once you have done all of the TL-WPA8631 devices, physically power off your router - a soft reboot won't work, it has to be physically disconnected from the mains. Wait a couple of seconds, then power it back on again. Once your router comes back online, go Advanced then click on its OneMesh tab & it should now "see" your TL-WPA8631 devices. You can now add them to your OneMesh network as normal. You may have to repeat this procedure if you get a power outage or brownout, as mine can't cope with any kind of power fluctuation or reboot without OneMesh going all wrong.
Good luck...
- Copy Link
- Report Inappropriate Content
@JustinSB Thanks for the suggestion but that's WAY too much work for me. We have 6 WPA8631 devices....
Last week the support team at TP-Link UK have sent me some new firmware whichseems to improve the situation. That said, the WPA devices fail to sync Guest network credentials.
Better, but not (totally) fixed.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2423
Replies: 9
Voters 0
No one has voted for it yet.