Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@TP-Link I've noticed that everytime I try to check the "Monthy Report", the app crashes. And It has been happening since the previous beta version. My phone is a Samsung Galaxy S21 Ultra and it runs Android 12 (but it also happened when it had Android 11). Check the report. Maybe it can be of some enlightening.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@TP-Link Any news on an updated beta build? Or official build?
- Copy Link
- Report Inappropriate Content
@TP-Link When will this be availible for Deco M5 v3.2?
/Ola
- Copy Link
- Report Inappropriate Content
Hi, I think it might be related to the private address used by Apple devices.
It hides the real MAC address of the Home Pods which made its manufacture unrecognizable.
https://support.apple.com/en-us/HT211227
If you have already found out what is this device, you could refer to this link to change the name back:
- Copy Link
- Report Inappropriate Content
Hi, the suggestions sound pretty good and I like the first one-search inside the APP and the last-scheduler to remove offline devices.
Would you mind starting a new thread to see if other users have the same request?
Thank you very much.
- Copy Link
- Report Inappropriate Content
@TP-Link Installed the new firmware, no problems, a very good improvement. I was able to easily configure my mesh network and improve the overall speed for some of my more remote locations. (I have 6 M5 units.) The only odd thing I've noticed is that some of my clients such as my Apple home pods no longer show with their assigned names. Instead, I see the devices listed as "rp. But clients like my MacBook or WDMyClould still report names correctly.
- Copy Link
- Report Inappropriate Content
since this is new upcoming firmware. Perhaps I can share some ideas for further improving the experience.
I believe we are missing a way to search inside the app. For ip or MAC address to lookup what is there.
it would also be great to have the DHCP ip assigned list showing to see what is using what and the current lease time!
Being able to set more options for a group like IoT to be on the network but no internet access.
Lastly I also think that we should have the option to have a scheduler to remove devices under the offline section of the app automatically if the device haven't been present on the network for some time.
I would also like to warn people at the same time that have lots of Apple devices like me. The private address function under the WiFi settings causes the Deco to see the phone / iPad as new devices all the time as the MAC address changes this creating a lot of the same devices and release new ip at the same time. Look under your offline section of the deco app. It's a great feature in the latest iOS but I do recommend to turn it off for the home network! It can cause a lot of problems.
- Copy Link
- Report Inappropriate Content
@TP-Link Will it be released for M4 and if yes, when? Really struggling with my Deco in the Groundfloor because it keeps connecting to the mainstation in the 2nd instead of the station in the 1st. Little dataflow is enough for the station to completely loose connection. Not even then it connects to the station in the 1st.
- Copy Link
- Report Inappropriate Content
@TP-Link
Is it possible that perhaps tp-link would like to share their firmware roadmap for their deco series of upcoming features and improvements.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 14
Views: 314275
Replies: 866
Voters 5
