Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@TP-Link it doesn't respect the preferred deco.
- MacBook Air
- iPhone
I must retry endless until it connects on designed preferred deco.
- Copy Link
- Report Inappropriate Content
@TP-Link May I know if you have any updates regarding the issue I reported? Do you get any findings about what causes the issue? Thanks!
- Copy Link
- Report Inappropriate Content
Everything seems to work fine except all my Wyze cams are reported offline although they are very much online and working. I'm using identical M5 pucks in AP mode and all with ethernet backhaul.
- Copy Link
- Report Inappropriate Content
Hi, here are some suggestions for you:
1. turn off the fast roaming on the Deco APP.
2. restart all the Deco units once.
3.check whether the cameras are still offline or they disappeared from Deco, neither online or offline?
If they are still offline or disappeared, please send an email to support.forum@tp-link.com with the exact model number of your Wyze cams.
Thank you.
- Copy Link
- Report Inappropriate Content
Hi, Did you see my private message, and could you please have a look and help me check some details?
By the way, I also like to follow up on your case by email, and please also make sure that you could get an email for us.
Thank you.
- Copy Link
- Report Inappropriate Content
I am facing the same issues. Several devices do not respect preferred deco and keep connected to Decos with lower signal.
I've disabled Fast roaming and still facing the issue.
My Sony TV is one of them and keeps disconnecting. I need to manualy reconnect everytime I switch it on.
If the launch of a corrected version takes too long, please let us downgrade to latest 1.5 version where these issues were not happening.
Thanks!
- Copy Link
- Report Inappropriate Content
Hi, nice to see you again.
May I know what are the devices that did not work with the connection preference?
Did you also turn off Mesh Technology for Sony TV?
How often did the Sony TV drop the connection?
Would there be any error message on the TV when it got disconnected?
The first time you updated the 1.6.0, you also mentioned speed delay, was It still the problem?
As for the firmware downgrade, I am afraid 1.6.0 could not be downgraded back to 1.5.x.
Thank you very much.
- Copy Link
- Report Inappropriate Content
@TP-Link Hello, I sent a response to support.forum@tp-link.com. I would like to have an email thread. I am attaching photos so that others can see what I am referring to. Connection preference is BAR, but it connects to KITCHEN. I also have Mesh Technology toggled off, trying to "force" the connection.
- Copy Link
- Report Inappropriate Content
@TheRealGG same problem here. As I reported twice.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 236490
Replies: 873
Voters 5
