Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@TP-Link When will this be available for the X20?
- Copy Link
- Report Inappropriate Content
@TP-Link I have updated my Deco's, but 2 of them failed to upgrade to the newest firmware. They stay at firmware 1.5.7.
Is there a way to update the other 2? Every time I try to upgrade again it's failing.
The other ones work fines. It's so nice to select the signal source.
- Copy Link
- Report Inappropriate Content
@TP-Link I was wondering how testing of this release is progressing and when the final release can be expected to rollout to all units. I'm not keen to Beta test due to work from home.
- Copy Link
- Report Inappropriate Content
We are all wondering that Fuzzme.
the questions have been asked many times in this long thread. But those questions are never answered. When is aimed for release? Why only 1 beta for so many months now, when several people have identified issues including my self here. The beta program is strange and not used optimal. I wouldn't recommend either to install the beta when your working from home currently. I would have liked to see for the long time this has been out. At least 2-3 betas with fixes for the findings. I don't believe they can get everything right in one beta. Just look at how Apple is doing it. And they also still fail in their releases despite of that.
- Copy Link
- Report Inappropriate Content
I had similar problems with this firmware and working from home made the things worse!
Support requested from me to test a debug firmware but I didn't have the time to test or debug, I had to act ! So I decided to downgrade back to a working firmware using the following guide:
https://www.tp-link.com/us/support/faq/2958/
I had m4 and m5 deco so I had to proceed with the TFTP Solution.
Be advised that you may brick your devices if something goes wrong like disconnect or power failure.
- Copy Link
- Report Inappropriate Content
Seems we are all stuck on the beta firmware now! 😒
- Copy Link
- Report Inappropriate Content
Beta is way too long. I've been on this version for months! I thought I'd be on a several revised editions by now. Prob even an official release! I'm never installing a beta version again. What a shambles @Bolton-UK
- Copy Link
- Report Inappropriate Content
Information
Helpful: 14
Views: 243365
Replies: 862
Voters 5
