Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@TP-Link Not sure about al I read on all the pages but my antivirus stays locked to 105 days of protection.
Is it a known bug of this beta?
- Copy Link
- Report Inappropriate Content
@Lordvader So a major bug like that and they haven't even addressed it? That seems very strange. I think if you contact support there may be a way to downgrade. I thought it might be just me having this issue ith the device names
- Copy Link
- Report Inappropriate Content
@ConcernedUser as specified in the first post of this topic, it looks like there is no way to downgrade from 1.6.0.
So the only solution looks like to wait for the day when TP-Link will remind they have some beta testers ;) if developers even remind they have some Deco users.
- Copy Link
- Report Inappropriate Content
Hi, could you please go to Deco APP>Overview>three lines on the top left>help>contact us>suggestions and add the APP log, then send to us?
Please also add some pictures about the invalid device name on the Deco APP in the email.
Thank you very much.
- Copy Link
- Report Inappropriate Content
Hi, I am not quite sure what you meant by saying “the antivirus stays locked to 105 days of protection”. Taking the following page as an example, Did the protection days-56 never change here?
- Copy Link
- Report Inappropriate Content
TP-Link wrote
Hi, I am not quite sure what you meant by saying “the antivirus stays locked to 105 days of protection”. Taking the following page as an example, Did the protection days-56 never change here?
@TP-Link yes, that's what I mean.
In my case it stays locked to 105 days.
In my case everyday, there are 105 days spent.
- Copy Link
- Report Inappropriate Content
Hi, can you send a screenshot of the protection date to me?
And please also send APP feedback via Deco APP>Overview>three lines on the top left>help>contact us>suggestions and add the APP log, then send to us.
Thank you very much.
- Copy Link
- Report Inappropriate Content
@TP-Link done, I've sent you the screenshot and also sent a suggestion where I also attached the same screenshot. My interface is not in English but 105 is 105 ;)
- Copy Link
- Report Inappropriate Content
@TP-Link I have done as you asked. Hope this can be fixed.
- Copy Link
- Report Inappropriate Content
@ConcernedUser Nardol Thank you and all the feedback has been received. Please reach out to the email for further assistance.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 240331
Replies: 873
Voters 5
