Official Release Deco M5 1.7.8
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
budgie29 wrote
@David-TP Waiting to hear back regarding my question from earlier on in the week where my v3 can upgrade to 1.6.0 but it seems my v1 isn't compatible. Same issue when i try in the deco IOS app as well.
Hi @budgie29
I haven't had a problem with installation of 1.6.0 on my Ver.1.0 M5's they've been working without any problems.
- Copy Link
- Report Inappropriate Content
@David-TP I have a question. If I wanter to prolong the lifespan of my deco m5 which action is more appropriate
A.) Should I leave them running 24/7
B.) Should I turn them off every night when they are not in use
Please help me with it thanks
- Copy Link
- Report Inappropriate Content
This and even the firmware showing up on the US website. I don't love the idea going to another regions website to get a download for a device I use in the US. If the firmware is ready then just release it in all the places.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
How can i upgrade the firmware?
I have the deco M5.
Dont see more --> advanced --> LAN ip in the deco app.
is it possible to push a client to 1 deco with the new firmware? With us, this client keeps changing, but on one deco it has a bad connection and on the other it's good. I actually want him to stay stuck on that deco.
- Copy Link
- Report Inappropriate Content
To manually upgrade you have to download the firmware and the go to your primary Decos IP address in a browser (likely 192.168.0.1).
Yes. With 1.6.0 you pull up the device in the Deco app and then click the settings gear in the top right and then connection preference then you can tell it which Deco to prefer.
- Copy Link
- Report Inappropriate Content
@David-TP Please any help upgrading my M9 to 1.6 version? I only see the M5 one. Isn´t the M9 supposed to be the priority, being the more expensive product?
- Copy Link
- Report Inappropriate Content
@Liquidowo this is a forum about M5. Not M9.
- Copy Link
- Report Inappropriate Content
@JanRekenaar I know, but i couldn't find any info for 1.6 m9 in the forum, can you show me the m9 post please?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 15
Views: 238912
Replies: 873
Voters 5
