Official Release Deco M5 1.7.8
![](https://static-community.tp-link.com/icon/8948432f591c4d71b5d8508983a0435f.jpeg)
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.8 Build 20240719 for All versions
Modifications and Bug Fixes:
1. Improve the device stability.
2. Enhance the system security.
3. Fixed the bug of Deco network disconnection after adding satellite Deco.
Note: We recommend all users upgrade to this firmware version for important security updates.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@manni Where did you get the 1.7.1 firmware? I thought it was only up to 1.7.0 before it was pulled.
manni wrote
I upgraded my two M5's to 1.7.1 last week. Update went fine and everything is fine. They are with ethernet backhaul. New features are also good stuff, Eco Mode and isolating IoT devices from other local network.
My 5 year ole devices still rock! Thank you TP-Link.
- Copy Link
- Report Inappropriate Content
CenterInYou wrote
@manni Where did you get the 1.7.1 firmware? I thought it was only up to 1.7.0 before it was pulled.
@CenterInYou I got update from Deco App. Region is Finland / Europe.
- Copy Link
- Report Inappropriate Content
@CenterInYou I downloaded the version 1.7.1 directly from this link https://www.tp-link.com/pt/support/download/deco-m5/v3/#Firmware
Just be careful to select the version because mine is v3
- Copy Link
- Report Inappropriate Content
@Andre_Silva Nice! didn't notice they had pushed a newer build after pulling 1.7.0.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Andre_Silva Updated successfully!! Thanks for posting the link!
- Copy Link
- Report Inappropriate Content
I have auto updates turned on so the deco's will download the latest firmware automatically when available but somehow it didn't and was showing 1.7.0 as the lasted build, now successfully download the 1.7.1 build and manually updated each Deco, Thanks tor the heads up, I will keep a eye on the Deco support page for future upgrades instead.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@xQuantum what's the latest firmware you are using right now? I can see in the UK site it's 1.6.1
- Copy Link
- Report Inappropriate Content
I was also able to update successfully using available firmware on the French TP-Link support page.
OTA did not show any update.
I still have more disconnection notifications than I had with 1.6, even after disabling IOT network and put back devices to main network.
Even if it is really better since I disabled IOT network, looks like IOT network can cause some trouble.
A bug I have is disconnection of Chromecast with Google TV 4K when enabling IPv6 (bridge mode) but I did not test with previous versions and I'm going to change my ISP so going to test with the next one which might allow me not to use bridge mode but might allow to have a delecated prefix which could be better IMO.
- Copy Link
- Report Inappropriate Content
![](https://static-community.tp-link.com/icon/8948432f591c4d71b5d8508983a0435f.jpeg)
Information
Helpful: 14
Views: 228340
Replies: 869
Voters 6
![voter's avatar](/avatar/avatar-5.png)
![voter's avatar](https://static-community.tp-link.com/icon/9eb8e7080f1049cfbff7d60c1cfd305c.jpeg)
![voter's avatar](https://static-community.tp-link.com/icon/ecd216a2993649fcba51dd0f1c05cf88.jpeg)
![voter's avatar](/avatar/avatar-10.png)
![voter's avatar](https://static-community.tp-link.com/icon/034b61c58e5343b68b00f48fbacb9080.jpeg)
![voter's avatar](/avatar/avatar-8.png)