New Release Deco M5 1.7.4/1.7.6
Current Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.6 Build 20240305 for EU version
Deco M5_1.7.4 Build 20231222 for other versions(like US/CA/AU, etc.)
Modifications and Bug Fixes:
1. Improved system stability.
2. Fixed several security vulnerabilities.
---------------------------------------------------------------------------------------------------
History Release
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.3_Build 20230906
New Features/Enhancements:
1. Optimized the auto-upgrade function.
2. Optimized the accuracy of the client list display.
3. Improved system stability.
4. Fixed the bug that port scanning errors recognized some IOT devices as risky devices.
5. Fixed the bug that parental control doesn't take effect.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.7.1_Build 20230608
Modifications and Bug Fixes:
1. Added the static route function.
2. Added the ability to customize the MTU.
3. Added IoT network function.
4. Added auto upgrade function
5. Added ECO Mode (includes Power Mode, Wi-Fi Schedule, and LED Control) to save energy.
6. Optimized the MAC Clone function.
7. Fixed the bug of network abnormality under specific ISP.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.5_Build 20230110
Modifications and Bug Fixes:
1. Fixed the issue that failed to set up Deco on Android 13 phones.
2. Fixed the issue that the online client displays zero incorrectly.
3. Optimized the Network Optimization feature.
For Deco M5(V1/V2/V3/V3.2)
Deco M5_1.6.1_20220818
- Apply to US/EU/JP/AU/CA/TW/ID/UK/SW/EU/B4 versions.
- 1.6.1 firmware will be gradually released to different areas and if currently it could not be detected on the Deco APP, you could wait for a while or a firmware upgrade via web UI is recommended.
Improvements:
1. Optimized the Monthly Reports.
2. Improved system reliability.
Bug fixed:
1. Fixed the bug that clients won't be able to obtain IP addresses randomly.
2. Fixed the bug that insight/time limit of parental control won't reset the next day.
3. Fixed the bug that No-IP DDNS doesn't take effect under PPPoE connection.
4. Fixed the bug that the client list randomly does not show any client or recognizes satellite Deco as a client.
For Deco M5(V1/V2/V3/V3.2)
New Features/Enhancement:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco signal source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients connection preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP
6. Added a prompt when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. When configuring Deco for the first time, you can choose to establish an IPv6 connection directly.
Related Articles:
Frequently Asked Questions on Deco Firmware Update
Deco Monthly Recap- Check What's Currently Going on With Deco
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
1. Yes twice. The admin page didn't failed to load, the page was loading but there was problem signing in ( stuck on authentication). Ping was working.
2. 2* HS110, 2*LB130, 2*P100. Deco app was not showing smart device tab at all. Tapo app and Kasa was showing the devices correctly .
3. I was transferring files from my remote VPN Site , not locally. Mesh was disabled but didn't changed anything. As I wrote before using cable on a satellite deco and transferring files from my remote VPN site was working as expecting , connecting to the same satellite deco wireless, transferring files from my remote VPN site drops to 355Kbps - 2Mbps ( with cable was 4Mbps - 9Mbps ). Wireless test was made next to the satellite deco, with 802.11ac 866Mhz.
I've tested with the first version 1.6.0 but had too many issues that I had to revert back to 1.5.7 ( followed your unbrick solution using tftp ).
- Copy Link
- Report Inappropriate Content
@Billmanakos JanRekenaar is it possible to record a video clip of the web UI log-in process for me?
(I have provided my email address for you and you could also send the video clip via email to me,)
If possible, please also try to test on a different web browser and log in under incognito mode to have a look.
Have you tried to re-add these smart devices to Deco APP to see whether it made any difference: click the "+" icon on the top left then choose "smart devices".
Thank you very much.
- Copy Link
- Report Inappropriate Content
Hello
I installed firmware 1.6.0. So far so good, the sattelite source selection and device/client source connection are great additions we were waiting for since years! Good job!
However these features are still buggy.
1) the device/client source conection doesnt work for devices connected on the guest network, as stated. But why? Many of us connect all IoT device to the Guest network for security reasons, it would be great of we could assign them which Deco they can be connected to as for the rest on the main network.
2) as mentionned by many users on this thread, the feature is still useless as for today. For example I assign my phone to only connect on the 5ghz, but it still connects randomly on rhe 2.4ghz
- Copy Link
- Report Inappropriate Content
The problem is when it happens the tab Smart is not available so I can not add smart devices. If I reboot the smart tab appears again with all connected smart devices.
I will try and record when it happens again.
- Copy Link
- Report Inappropriate Content
@David-TP I can record it. To which e-mail can I send it?
- Copy Link
- Report Inappropriate Content
I have sent my email address via private message and please check whether you could get my email.
Thank you.
- Copy Link
- Report Inappropriate Content
@TP-Link
Hi, quick question since I am unable to search in the thread:
Will this firmware also work with the S4 that is experiencing choosing the wrong source?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Dekel Unfortunately Deco M5 doesn't achieve full gbit. It is not related to firmware version 1.6.0. Max you reach is about 500 mbps.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 14
Views: 207280
Replies: 844
Voters 6
