AC2100 VR600 Interface grouping can't edit VER3 (useless)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AC2100 VR600 Interface grouping can't edit VER3 (useless)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AC2100 VR600 Interface grouping can't edit VER3 (useless)
AC2100 VR600 Interface grouping can't edit VER3 (useless)
2021-10-23 03:50:21
Model: Archer VR600  
Hardware Version: V3
Firmware Version: 1.4.0 0.9.1 v009e.0 Build 210826 Rel.42166n

I can't edit interface grouping , it;s useless , I should be able to customize this and choose WAN interface but this not appear as per screen shoot (No WAN interface list appear)
I need to customize this to be able to choose ex: LAN1-LAN2-LAN3 with Wan interface "3g/4g modem)
as in case 3g works as a backup then it will work for only LAN ports and not for WLAN
Also this can be useful in case I connect the WAN/LAN4 port to a modem so I can customize to use 2 lines DSL for WLAN and WAN/LAN4 for LAN1-LAN2-LAN3

Or even for a backup to the DSL

this is an examples for what I can do

so please I need these modifications to applied to the next firmware update ASAP 

  2      
  2      
#1
Options
5 Reply
Re:AC2100 VR600 Interface grouping can't edit VER3 (useless)
2021-10-29 03:03:46

@Hany_Ghoneim 

Hi, thank you very much for your feedback.

Did you mean that there is no available WAN interface for selection when setting up the interface grouping?

If yes, can I have a picture of the Advanced>Network>internet page?

Did you have this issue after the latest firmware upgrade?

  0  
  0  
#2
Options
Re:AC2100 VR600 Interface grouping can't edit VER3 (useless)
2021-10-29 12:28:29

@TP-Link 

Yes as per screenshot in my first reply there is no wan interface to be added when creating a group 

This current status was when I opened the router for the first time and still even after update to the last version which I mentioned before 

 

 

 

 

  2  
  2  
#3
Options
Re:AC2100 VR600 Interface grouping can't edit VER3 (useless)
2021-11-01 09:46:37

@Hany_Ghoneim 

Thank you very much for the update.

I have forwarded your case to the senior engineers and please refer to the email for further assistance.

 

  1  
  1  
#5
Options
Re:AC2100 VR600 Interface grouping can't edit VER3 (useless)
2022-04-14 09:52:39

  @TP-Link Hi,
Any updates regards this ? we are in April 2022 !

  0  
  0  
#6
Options
Re:AC2100 VR600 Interface grouping can't edit VER3 (useless)
2022-04-19 07:52:56

  @Hany_Ghoneim 

You don't get any reply from their engineers?

And here is what I got:

(First I have VR2100 for a test)

I could edit the WAN interface which is out of surprise and then I found out I was on bridge mode since I also had Deco as my own router.

Then I switched it back to DSL router mode, undoubtedly I got the same issue as you did.

But I find something interesting later, even though I could not edit the WAN interface, the DSL WAN seemed to be added into all VLAN groups.

  0  
  0  
#7
Options