Official Release Deco M9 Plus 1.6.4
Current Release
For Deco M9 Plus(V1/V2/2.2)
Deco M9 Plus_1.6.4_Build_20240718
Release Note:
1. Improve the device stability;
2. Enhance the system security
---------------------------------------------------------------------------------------------------
History Release
For Deco M9 Plus(V1/V2/2.2)
Deco M9 Plus_1.6.3_Build_20231225
Release Note:
1. Fix the potential security vulnerability and its related problem.
2. Improve system stability and security.
For Deco M9 Plus(V1/V2/2.2)
Deco M9 Plus_1.6.2_Build_20230906
Release Note:
1.Fixed the bug that parental control doesn't take effect.
For Deco M9 Plus(V1/V2/2.2)
Deco M9 Plus_1.6.1_Build 20230403
Release Note:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco Signal Source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients Connection Preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS.
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP.
6. Added a prompt notification when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. Fixed the bug that the built-in speedtest has low speed test results.
Notes:
1. This firmware downgrade could be done via firmware recovery-How to use firmware recovery.
2. Please update your Deco APP to the latest version for the new features.
3. If there are non-1.6.0 models in the Mesh network, you may miss some new features but this feature will be supported via firmware update in the future.
4. You may miss some new features when Deco is set to Access Point mode.
Related Articles:
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Sofa_king_lazy I did that via the support team of TP-Link.
- Copy Link
- Report Inappropriate Content
@HopSaSam how ere you able to downgrade? i just tried on mine and after flashing both sattalites they are still on 1.6.0
- Copy Link
- Report Inappropriate Content
Hi @David-TP and all other,
Via the support team, I managed to have a downgrade from the latest build, back to 1.5.6.
And I'm lucky now. I will never ever participate anymore in this type of so called "beta".
I'm working in the software industry as well, but when executing UAT (User Acceptance Testing), I know my team created something that we tested before and works.
Don't ever ask your users to do bug fixing, only validating.
So, people: my advice: stick to alfa releases!
- Copy Link
- Report Inappropriate Content
Hi, for the feedback that "Connection Preference for Guest Network", so far it hasn't been under the consideration.
If possible, it is suggested to start a new thread about this request here so that I could check regularly whether more users request the same feature.
As for the new beta firmware, I am afraid it might still need a while.
As for the feedback here" it says Deco 2 for example is offline but actually, it's working fine and the light is green", It would be highly appreciated if you could send us the APP log and a screenshot of your network layout(please mark out the offline Deco on the APP.).
Thank you very much.
- Copy Link
- Report Inappropriate Content
I think there's a problem with Deco units status through the app, it says Deco 2 for example is offline but actually it's working fine and the light is green.
It has been a month now without a new beta version, any news about the upcoming update?
- Copy Link
- Report Inappropriate Content
@David-TP Updated my 4 units to 1.6.0 Build 20220823 Rel. 17172. Everything seems to be running perfectly so far, but based on this thread there may be a more recent update. Should I hold off for now since I am not having any problems, or could you send me the updated firmaware as well?
- Copy Link
- Report Inappropriate Content
Can you please add Connection Preference for Guest Network?
This feature is already available for main network, we just need it to be available for the guest network users too, it will be nice to control 2.4/5Ghz and preferred unit for these users too.
Please tell us if it's even something you consider adding in the near feature or not?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@HopSaSam good to know, yeah my network is crippled but usable. My phone seems ok it's just 2.4ghz devices and possibly beam forming. I have fast roaming off and mesh off on devices that don't move.
- Copy Link
- Report Inappropriate Content
@David-TP @xQuantum @Sofa_king_lazy,
I wouldn't recommend to install the version later than 23/08, but I need to be honest as well: the performance of the later versions is (except for the horrible disconnects) way faster than all previous verions I ever had.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 8
Views: 142077
Replies: 436
Voters 2
