Official Release Deco M9 Plus 1.6.4
Current Release
For Deco M9 Plus(V1/V2/2.2)
Deco M9 Plus_1.6.4_Build_20240718
Release Note:
1. Improve the device stability;
2. Enhance the system security
---------------------------------------------------------------------------------------------------
History Release
For Deco M9 Plus(V1/V2/2.2)
Deco M9 Plus_1.6.3_Build_20231225
Release Note:
1. Fix the potential security vulnerability and its related problem.
2. Improve system stability and security.
For Deco M9 Plus(V1/V2/2.2)
Deco M9 Plus_1.6.2_Build_20230906
Release Note:
1.Fixed the bug that parental control doesn't take effect.
For Deco M9 Plus(V1/V2/2.2)
Deco M9 Plus_1.6.1_Build 20230403
Release Note:
1. Added Reboot Schedule for every day/week under Deco App > More > Reboot Schedule.
2. Added support for customizing Satellite Deco Signal Source under Deco App > Internet > Select the Satellite Deco > Signal Source.
3. Added support for customizing clients Connection Preference under Deco App > CLIENTS > Select the client > Click the gear icon on the right-up corner > Connection Preference.
4. Added No-IP and DynDNS to the DDNS settings under Deco App > More > Advanced > DDNS.
5. Added Smart DHCP on/off switch in Access Point mode under Deco App > More > Advanced > Smart DHCP.
6. Added a prompt notification when the Ethernet link rate goes down to 100Mbps.
7. Added schedule and bandwidth limit to guest network under Deco App > More > Wi-Fi > Guest Network.
8. Fixed the bug that the built-in speedtest has low speed test results.
Notes:
1. This firmware downgrade could be done via firmware recovery-How to use firmware recovery.
2. Please update your Deco APP to the latest version for the new features.
3. If there are non-1.6.0 models in the Mesh network, you may miss some new features but this feature will be supported via firmware update in the future.
4. You may miss some new features when Deco is set to Access Point mode.
Related Articles:
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi all,
As TP-Link produces a new router every week and no updates en buggy software, I would like to share experiences of other brands.
Who has experience with mesh systems that work, keep their software up-to-date and:
- have a user management, including devices per user
- have good mesh capabilities
- a mobile app to monitor usage and registered devices
- capabilities to give a personal name to every device
- capabilities to gives high-prio to some devices
Thanks for sharing your advice (so we can leave this shizzle behind).
- Copy Link
- Report Inappropriate Content
I have the deco m9 v2
- Copy Link
- Report Inappropriate Content
I have the same speed as the main router one in this update
935 down and 230 up
- Copy Link
- Report Inappropriate Content
https://we.tl/t-8SqHKQ6D8Y
here is the file uploaded
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Getting better (I flash over same file from Japan) but now I Get 621 (and with firmware 1.5.6 I get 950)
A detailed image for this result can be found here:
https://www.speedtest.net/result/14538369917
- Copy Link
- Report Inappropriate Content
How do you guys upgrade?
I have M9 Plus v1 and the v1 does not support the upgrade utilty...
- Copy Link
- Report Inappropriate Content
Try going to http://tplinkdeco.net in your web-browser and login with the same password as on your TP-Link account.
Full guide here:
- Copy Link
- Report Inappropriate Content
Thanks. I tried that in the past. But I don't remember why the web-based interface didn't work. I got a message with something like 'This site is not accessible'
- Copy Link
- Report Inappropriate Content
@Superior3000 I have to use a portable firefox setup to reach the site, chrome doesn't want to due to connection getting rejected :o
- Copy Link
- Report Inappropriate Content
Information
Helpful: 10
Views: 112983
Replies: 440
Voters 2
