Official Firmware of VPN Client for Archer AX11000/AX6000 V1 is available

Official Firmware of VPN Client for Archer AX11000/AX6000 V1 is available

159 Reply
Re:Early Release VPN Client Firmware for Archer AX11000/AX6000 V1
2023-01-18 02:09:39

  @Kevin_Z 

Thanks for reply, already install this new fw without any poblem, btw Kevin its possible for ax11k for added 1 menu such dns director , because this menu very important as im using asus with custom fw 😜, if this dns director ( bypass dns isp provider/custom dns) can apply on ax11k tplink , its should be a perfect router for tplink ax11k

Maybe can has this function 

 

If out out topic please delete this post 

  0  
  0  
#106
Options
Re:Early Release VPN Client Firmware for Archer AX11000/AX6000 V1
2023-01-27 10:46:19

  @Kevin_Z 

 

I still experience connectivity drop with this latest release (1.3.2 Build 20221128 rel.45807(4555)), as well as with all 1.3.1 releases.

 

I did not have this issue with the latest 1.3.0 release.

 

Status shows poor Internet. Rebooting the router solves this issue temporarily, issue will occur randomly (sometimes after 5 days, sometimes after 2 days after rebooting).

I might revert back to the 1.3.0 release.

 



 

  0  
  0  
#107
Options
Re:Early Release VPN Client Firmware for Archer AX11000/AX6000 V1
2023-01-28 06:33:38

@gpex 

 

Can I know who is your internet provider? Do you have a stable connection if you connect a laptop to the ISP provided modem directly?

 

Could you please send us the system log on the AX11000? You can go to Advanced > System > Backup & Restore to click backup button to download the config file and send it to us (support.forum@tp-link.com). Please DON'T reboot the router, and be sure the system log records the disconnect and reconnect behaviors.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#108
Options
Re:Early Release VPN Client Firmware for Archer AX11000/AX6000 V1
2023-01-28 06:40:34 - last edited 2023-01-28 06:55:47

 

Tukulstar28 wrote

  @Kevin_Z 

Thanks for reply, already install this new fw without any poblem, btw Kevin its possible for ax11k for added 1 menu such dns director , because this menu very important as im using asus with custom fw 😜, if this dns director ( bypass dns isp provider/custom dns) can apply on ax11k tplink , its should be a perfect router for tplink ax11k

Maybe can has this function 

 

If out out topic please delete this post 

 

@Tukulstar28 Thank you very much for your valued suggestions.

 

TP-Link routers don't support the DNS Director functions yet, but we will make sure to bring this forward to the related team as a feature request.

 

Thank you again for your feedback.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#109
Options
Re:Early Release VPN Client Firmware for Archer AX11000/AX6000 V1
2023-01-28 21:43:16

  @gpex Yes, I seem to be having these issues again too - where can I get v1.3.0 fw for EU v1 hardware as that version was issue free for me as well? Every day now, getting a minute or two of sudden drops and several times a day. Logs show nothing of interest

  0  
  0  
#110
Options
Re:Early Release VPN Client Firmware for Archer AX11000/AX6000 V1
2023-01-29 01:11:11

 

RobbieB50 wrote

  @gpex Yes, I seem to be having these issues again too - where can I get v1.3.0 fw for EU v1 hardware as that version was issue free for me as well? Every day now, getting a minute or two of sudden drops and several times a day. Logs show nothing of interest

 

@RobbieB50 Do you still have a stable connection if you connect a laptop to the Virgin Media Hub directly?

 

How about the LED on the AX11000, will it change to red when the disconnect happens? Or it is always white?

 

Could you please send us the system log on the AX11000? You can go to Advanced > System > Backup & Restore to click backup button to download the config file and send it to us (support.forum@tp-link.com). Please DON'T reboot the router, and be sure the system log records the disconnect and reconnect behaviors.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#111
Options
Re:Early Release VPN Client Firmware for Archer AX11000/AX6000 V1
2023-01-29 10:03:48

  @Kevin_Z Hi there, I have email and attached log and config too.

  3  
  3  
#112
Options
Re:Early Release VPN Client Firmware for Archer AX11000/AX6000 V1
2023-01-29 17:47:47

Kevin_Z wrote

@gpex 

 

Can I know who is your internet provider? Do you have a stable connection if you connect a laptop to the ISP provided modem directly?

 

Could you please send us the system log on the AX11000? You can go to Advanced > System > Backup & Restore to click backup button to download the config file and send it to us (support.forum@tp-link.com). Please DON'T reboot the router, and be sure the system log records the disconnect and reconnect behaviors.

  @Kevin_Z 

 

My internet provider is T-Mobile (in the Netherlands).

I have both wired en non-wired connections to the router and both types of connections experience the same issue.

 

I have the system log enabled. If the issues occurs again, I will not reboot the router and secure the system log and send it to the specified email address.

 

Can you confirm if I can downgrade directly from 1.3.2 to 1.3.0?

  0  
  0  
#113
Options
Re:Early Release VPN Client Firmware for Archer AX11000/AX6000 V1
2023-01-30 01:24:33

gpex wrote

   @Kevin_Z  

 

My internet provider is T-Mobile (in the Netherlands).

I have both wired en non-wired connections to the router and both types of connections experience the same issue.

 

I have the system log enabled. If the issues occurs again, I will not reboot the router and secure the system log and send it to the specified email address.

 

Can you confirm if I can downgrade directly from 1.3.2 to 1.3.0?

 

@gpex Yes. You can still downgrade to the previous 1.3.0. But you can keep the 1.3.2 official version if you're willing to troubleshoot with our engineers. Thank you very much.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#114
Options
Re:Early Release VPN Client Firmware for Archer AX11000/AX6000 V1
2023-01-30 14:58:42 - last edited 2023-01-30 15:48:45

  @Kevin_Z 

 

Hello,

 

I recently updated to 1.3.2  

 

This is the first firmware upgrade I've done on the unit since I purchased it due to seemingly I was quite a few versions behind, and this latest one had a lot of fixes/features.

 

Unfortunately, this is the very reason I did not upgrade the firmware as before 1.3.2, I have a very stable connection. Now about once a day, the router drops connection.

 

I can confirm its the router as I still have a connection via the modem when this happens; Moreover, it's most definitely this firmware update as my connection was 100% stable until updating. It's been all downhill since then. 

 

I can't confirm the light color when this happens - as I wasn't really paying attention to that. I have a multi-room setup of Sonos products on top of the 30+ other devices connected - this is causing absolute havoc with all my wireless devices.

 

Could you provide a link to the seemingly stable 1.3.0 firmware so I can downgrade?

 

ISP - Xfinity US

 

AX11000 V1

 

  0  
  0  
#115
Options