New Release Archer MR600 V1
Hi All,
Since there are several beta versions for different issues on MR600(EU) V1, now we have made a new beta firmware to fix all the previous issues.
Here is the download link:
Modifications and Bug Fixes:
1. Fixed SMS related issue
2. Fixed the issue that Send button grayed out when replying USSD at second time
3. Fixed address reservation issue that the 10th item cannot be added
4. Fixed the issue that client device cannot download files bigger than 2GB
5. Added manual 4G band selection feature
6. Added OneMesh on/off switch
7. Add Ping feature as offline detection under 3G/4G Backup
It is highly recommended to install this firmware on Archer MR600(EU) v1 in the first place, and any feedback will be extremely appreciated. Thank you very much.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
The thread is unsticked, does that mean it won't be fixed anymore?
- Copy Link
- Report Inappropriate Content
@Sunshine any news about this topic?
- Copy Link
- Report Inappropriate Content
@Sunshine WIth the latest beta software in MR-600V1 i want to select bands unfortunately no option of Selection 40,40 , I can select some other combination like3,40 but want to select 40,40 - how to do that ? Please advice ( Leaving it in Auto Band Selection mode chooses only one band - with the old beta software, i was able to select 40,40 and MR600 was working with carrier aggregation in 40,40
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Sunshine MR600 V1 - Old Beta firmware Carrier aggregation even with 25% signal with antennas removed and placed inside concrete walls. New Beta even at 75% or 100% signal no Carrier aggregation
- Copy Link
- Report Inappropriate Content
@Sunshine Здравствуйте.Archer MR600 v1.После установки прошивки 22.0818,обновился ISP файл для провайдеров.В результате оператор Kyivstar Украина,полностью пропал интернет.Установка всех старых прошивок ничего не помогла,так как ISP файл остался прежним от 23021501 и старый установить нет возможности.Удалось победить эту проблему,созданием через веб-интерфейс вручную новой точки доступа APN,где указать тип PDP:IPv4.Если поставить тип PDP IPv4&IPv6 интернета нет.Хотя на телефоне работает IPv4&IPv6.Прошу Вас исправить ISP файл 23021501 для провайдеров, для оператора Kyivstar Украина или скажите,как восстановить старый ISP файл для провайдеров 21082501?
- Copy Link
- Report Inappropriate Content
I've loaded and tested the beta firmware, a step in the right direction but very unstable in terms of carrier aggregation and I don't think it's the base station.
I've been using a competitor's product for a long time, also with a Cat6 modem, and can use it for comparison. The MR600 does not maintain carrier aggregation and switches from dual to single and vice versa every few minutes. The other router maintains the carrier aggregation and does so continuously.
I think this is an indication that something is not right in the firmware. With the last official firmware, the carrier aggregation was also stable, but hardly usable due to the many other errors.
However, once the carrier aggregation works, I'll have better data throughput on the MR600, so it would be nice if it could be stabilized.
- Copy Link
- Report Inappropriate Content
Hi Ingo, this seems to be a continuing story then, I have the same problem with the MR600 v3 (see: https://community.tp-link.com/en/home/forum/topic/603932?sortDir=ASC&page=1).
@Sunshine , what is TP-Link going to do about it (and I haven't received any replies to my latest reports / posts yet)?
Thanks
- Copy Link
- Report Inappropriate Content
Hi, the ISP file 23021501 was not in this beta firmware as the ISP file is newer than this beta firmware.
ISP file cannot be downgraded, but usually most ISPs are using IPv4&IPv6 in the default profiles, may I know if you downloaded the ISP file 23021501 from our official website?
And is there any similar issue before you updating the ISP file?
- Copy Link
- Report Inappropriate Content
Hi, may I know the brand and model no. of your another LTE Cat6 product? and is it using automatic bands or also manual band selection?
Please check which band(s) your another Cat6 router is using continuously, then test the same SIM card on the MR600 at same location, then please share with us screenshots of both device.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 7
Views: 17840
Replies: 57