Home Network Community > Wi-Fi Routers > AX6000 broken wifi ? 2.4Ghz doesnt work, 5Ghz works sometimes
< Wi-Fi Routers

AX6000 broken wifi ? 2.4Ghz doesnt work, 5Ghz works sometimes

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX6000 broken wifi ? 2.4Ghz doesnt work, 5Ghz works sometimes

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AX6000 broken wifi ? 2.4Ghz doesnt work, 5Ghz works sometimes
AX6000 broken wifi ? 2.4Ghz doesnt work, 5Ghz works sometimes
2022-10-02 17:00:45
Tags: #Firmware Update #Smart Connect #Feature Request #WiFi
Model: Archer AX6000  
Hardware Version: V1
Firmware Version: 1.2.5 Build 20211208 rel.49262(4555)

Hi,

 

I've had my AX6000 V1 with FW "1.2.5 Build 20211208 rel.49262(4555)" now for a couple of months, and I have noticed that the behavior of the WiFi is extremely unreliable.

I've had in the past a two WR1043, MR3020, C9 and a AC3200. All of those have been used with no issues. Always have they worked.

 

So I have recently start using the feature of daily reboots at 06:00 hours each morning, and been getting surprised that my IoT devices can not connect to 2.4Ghz.
Why? Because the AP isn't there!

What I have tried.
Smart connect : yes   (This worked with AC3200 without any issue)
Bandwidth 20 or 40 MHz, and Auto: yes, equally bad.
Channels 1-13: yes, no change at all.

Turn off 5Ghz and only run 2.4Ghz without guest: yes, with hard(cold) reboot, nothing changed.

 

Sometimes the 2.4Ghz just shows up then disappears right after. which makes me believe that the WiFi parts are somewhat flaky.

I have checked the system logs, but they are very slim and don't show any fundamental function of good/bad.

 

In the past I've also used DD-WRT or OpenWrt or whatever FW, they have never ever behaved the way stock FW has behaved.

 

Why don't you just enable the possibility for developers and users to use whatever FW is out there? Sorta like there is a possibility to unlock boot loaders on android phones?

 

At current state I would not recommend buying a AX6000, I really had my hopes high on this product. But today I would be very reluctant into buying any product that is TP-Link.

  0      
 
  0      
 
#1
Options
4 Reply
Re:AX6000 broken wifi ? 2.4Ghz doesnt work, 5Ghz works sometimes
2022-10-04 08:29:26
Changing parameters in System Tools --> System Parameters for the 2.4Ghz seems to make AP come up sometimes. like 5% of the cases. 5Ghz is unaffected even if changing those parameters. Would be nice to see a somewhat of a functional log from the kernel sorta like Asus har done or whatever, some sort of feedback! The really funny part is that some of my smart devices like bulbs(2.4Ghz) are connected to the 2.4Ghz network but there is no such AP coming up; by connected, i mean that they are reachable from app on phone.
  0  
  0  
#2
Options
Re:AX6000 broken wifi ? 2.4Ghz doesnt work, 5Ghz works sometimes
2022-10-08 07:19:36

@wiktorb82 

 

Only those smart IoT devices are affected? Or only those smart IoT devices need to connect to the 2.4G network?

 

What are the brand and model of those smart IoT devices? When they lose the connection, are they completely disappearing from the AX6000's client list?

 

What if you enable the 2.4G Guest Network and connect those smart IoT devices to the Guest Network, will they get a stable connection?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#3
Options
Re:AX6000 broken wifi ? 2.4Ghz doesnt work, 5Ghz works sometimes
2022-10-11 11:14:00
I had some previous incorrect setting before on 2.4Ghz that would kill the 2.4Ghz completely, "Short GI enable". When i disabled that, then the 2.4Ghz. Now after some time, the 2.4Ghz has yet again died on me without any explanation or any change I've made. There is currently a tech support case that is ongoing with TP-Link. Sidenote: 2.4Ghz doesnt work on Guest, and on regular. No 2.4Ghz access point is visible on phone or on laptop.
  0  
  0  
#4
Options
Re:AX6000 broken wifi ? 2.4Ghz doesnt work, 5Ghz works sometimes
2022-10-12 18:36:17

My AX6000 seems to definetly have issues with 2.4Ghz only.

I am waiting on the support case to get in touch with me for solution.
In the mean time; I have configured my old Archer C9 so it is acts as a Access Point for 2.4Ghz.with same SSID name as the 5Ghz on AX6000. This works really good!.

But I am aiming for the long term solution in. Have a functioning AX6000 that promises 2.4Ghz and 5Ghz.

I will most likely return back this router if no solution is provided.

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 661

Replies: 4

Tags

Firmware Update Smart Connect Feature Request
WiFi
Related Articles
 5ghz wifi on ax6000 does not work
1529 0
 5Ghz doesnt work
309 0
 WiFi connection 5ghz works fine but 2.4ghz doesnt work
773 0
 AGAIN openVPN doesnt work
400 0
 Doesnt work
368 0
AP Isolation doesn't work between 2.4Ghz and 5Ghz
1726 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.