Mesh devices dropping from list in AX72 router
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
I have 3 TL-WPA8631P devices in a Onemesh network connected to the router (AX72). Usually, on the router Network Map page it shows "Mesh Devices 3". But after a day or two it only shows 2, or 1 devices.
The only way I have been able to restore the full number is to reboot the missing TL-WPA8631P device/s. The mesh network is still fully operational even when it shows an incorrect number of devices. Until I have re-booted the device I cannot see the TL-WPA8631P in the list and I can't list the connected devices in Advanced>Onemesh page of the router.
Is this merely a bug in the AX72 or is it more to do with the TL-WPA8631Ps themselves? It is tedious having to reboot them every couple of days.
The wi-fi network is still working on all three, but something does not appear to be functioning correctly.
Has anyone else been bugged by this issue?
The TL-WPA8631P hardware version is 3.0 and the firmware version is 3.0.1 Build 20220330 Rel.52768 - on all devices.
stevedr
@Liverpool20
Hi Thanks for your reply. There are three TL-WPA8631P powerline access points all connected via a TL-PA8010P master unit, which in turn is connected via Ethernet to the router.
It is all three, and there seems to be no pattern, but randomly one or more will drop out. Rebooting the router has no effect, but rebooting the affected TL-WPA8631P adapter will restore it to the OneMesh list.
Network Diagram:
