Home Network Community > Deco > Setting static IP for Deco M9 plus when used as access point?
< Deco

Setting static IP for Deco M9 plus when used as access point?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Setting static IP for Deco M9 plus when used as access point?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Setting static IP for Deco M9 plus when used as access point?
Setting static IP for Deco M9 plus when used as access point?
2023-02-01 18:18:27
Tags: #Access Point Mode #Static IP
Model: Deco M9 Plus  
Hardware Version: V2
Firmware Version: 1.5.6 Build 20211018 Rel. 35617

Just boght and are setting up the 3 M9 Plus units into my network.
I have made the first setup and everything is up and running but I want to change so that the units have static IP adresses.

My Setup is WAN -> Clavister Firewall -> M9 Plus

The primary unit is connected to ethernet from the firewall and working as an access point nut I can't seem to find a way to not use DHCP when working as AP?

Please confirm if I am missing something or if this ends up as an Feature Request...

I have as much stuff as possible using static IP when it is regarding infrastructure...

  0      
 
  0      
 
#1
Options
5 Reply
Re:Setting static IP for Deco M9 plus when used as access point?
2023-02-01 18:40:10
This is Not possible with deco devices. Only chance to get this working was at my FritzBox (DHCP-Server) add new Device (Deco) by Mac-Adress. After that your fritzbox will give your deco your Ip but it‘s still getting from DHCP Server
  0  
  0  
#2
Options
Re:Setting static IP for Deco M9 plus when used as access point?
2023-02-01 18:43:53

  @Devil1988 

 

So then this will go into "Feature Request" then...
Since it is possible when using M9 as router it should only be a firmware upgrade to make it possible.

Thank you for fast reply! Much appreciated!

  0  
  0  
#3
Options
Re:Setting static IP for Deco M9 plus when used as access point?
2023-02-01 20:44:55
Yes of course but I‘m waiting for this feature nearly two years on my x60
  0  
  0  
#4
Options
Re:Setting static IP for Deco M9 plus when used as access point?
2023-02-02 02:24:34

  @Devil1988 

Hi, you might want to try the 1.6.0 beta firmware for Deco M9 plus which allows you to turn off smart DHCP under Access Point mode:

Deco M9 Plus 1.6.0

 

Thank you very much.

Best regards.

▶Check What's Currently Going on With Deco ▶Parental Control Upgrade on HomeCare Models ▶Deco BE85 1.2.0 Enhanced Mesh Backhaul Stability and Device Roaming Experience ▶Deco BE65/BE65 Pro 1.2.0 Enhanced Mesh Network Stability and System Security ▶Deco BE75 1.1.0 Added WireGuard VPN, Manual Channel Selection and More Try to leave a Message if urgent help is required.
  0  
  0  
#5
Options
Re:Setting static IP for Deco M9 plus when used as access point?
2023-02-02 05:47:11
Ah M9 get‘s such an Beta but not x60 and P9? Sorry your devs are idiots
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1294

Replies: 5

Tags

Access Point Mode
Static IP
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.