Solution India Jio SIM stops working on TP-Link LTE Gateway Routers after upgrading to 5G
This Article Applies to:
All TP-Link LTE Gateway Routers including Archer MR600, TL-MR6400, etc.
Issue Description/Background:
Some customers reported that their Jio SIM card was working fine before, but the internet stops working after upgrading to 5G, old 4G Jio SIM card still works fine on the same device, while the 5G enabled Jio SIM card works on a smartphone or Jio's own router.
Available Solution
Before downloading and updating the following beta firmware, please verify the model number and hardware version on the product label, especially the models with x.0, x.20 and x.30 versions. Please note that the x.0, x.20 and x.30 are different versions and unable to use the same firmware.
For Archer MR600(EU) V3: Archer_MR600(EU)_V3_230811
For Archer MR600(EU) V2: Archer_MR600(EU)_V2_230801
For TL-MR6400(EU) V5.30: TL-MR6400(EU)_V5.30_230801
For TL-MR6400(EU) V5.20: TL-MR6400(EU)_V5.20_230815
For Archer MR200(EU) V5.30: Archer_MR200(EU)_V5.30_230816
For Archer MR200(EU) V5.20: Archer_MR200(EU)_V5.20_230815
For Archer MR400(EU) V4.30: Archer_MR400(EU)_V4.30_230928
For Archer MR600(EU) V1: Archer_MR600(EU)_V1_Builld_20231127
For Archer MR200(EU) V5: Archer_MR200(EU)_V5_24040425
For Archer MR200(EU) V6: Archer_MR200(EU)_V6_24040425
For TL-MR6400(EU) V5: TL-MR6400(EU)_V5_20240425
For TL-MR100(EU) V2: TL-MR100(EU)_V2_240313
Notes:
1) If there is still no internet or no IPv4 address when using the above beta firmware with Jio 5G SIM card, please check the default APN profile settings on Advanced->Network->Internet page, if the PDP Type is not on "XLAT", please create a new profile manually and set PDP Type as "XLAT", leave other parameters the same as default profile, then check if the problem will be resolved.
If so, please share with us the MCC&MNC of your SIM card, so that we could update the default profile settings for your SIM card.
You could insert the Jio 5G SIM card into your smartphone, then check the APN profile settings on the phone to find the MCC and MNC, please share with us the screenshot, thanks a lot!
2) The beta firmware is for Jio 5G SIM card only, please don't update it if you would like to use a different SIM card.
3) We will update this thread once there is any other beta firmware for other models or versions.
4) Please be sure you have read the Terms and Conditions for TP-Link Beta Firmware before proceeding
If internet still doesn't work with 5G Jio SIM after updating the above firmware, please make sure the PDP Type in the APN profile is XLAT, and provide the following information for further follow-up:
1. A screenshot of the Advanced > Status page.
2. A screenshot of the Advanced > Network > Internet page.
3. Save and send us the system log file. You can go to Advanced > System Tools > System Log page to save the log file.
4. Model number, hardware and firmware version of the TP-Link router.
Do let the community know if there is anything else that we can help with. We are always happy to help.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Subrata_9932 @Vignesh_Y @amitkray31 @Abhijit_Ghosh10
Hi, we are working on more beta firmware for different models/versions, once there is any new beta firmware, I will update the solution again.
- Copy Link
- Report Inappropriate Content
Model: TL-MR6400(EU)
S/N: 22117Y0004228
Ver:5.0
Firmware Version: 1.3.0 0.9.1 v0001.0 Build 201207 Rel.56223n
Hardware Version: TL-MR6400 v5 00000001
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, MR600 V1 beta is not available yet, it is expected to be available in next week, we will update the solution in this thread then.
- Copy Link
- Report Inappropriate Content
Could you please share me the firmware, because I am also facing the same issue in my Tp link v3 router with Jio sim.
- Copy Link
- Report Inappropriate Content
@Sunshine please update for v4 also, As i am getting same problem on my 5g upgraded sim of jio. i am using v4
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi @Sunshine
I would like to bring to your notice an observation I have made,
I have upgraded to the beta firmware 230506, and now my 5G Jio sim works fine, but my 4g sims no longer properly works.
Most recently I have put my airtel 4g sim card to my mr600 that runs on beta firmware, and I have seen again and again that
it fails to load some sites,
I was able to go to site 1 but site 2 didn't load for me when using airtel 4g sim with beta firmware.
Also, I appreciate your efforts greatly, thank you!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 42
Views: 80798
Replies: 423