Solution 464XLAT Support on TP-Link 4G/5G routers for Jio/EE/Optus/Vodafone and other SIM carriers
This Article Applies to:
TP-Link 4G/5G routers
Background:
With More and more SIM service providers gradually implementing 464XLAT mechanism in their services, after inserting the SIM card into TP-Link 4G/5G routers, some users might report that there is no internet access or certain Apps/websites can't be accessed. When checking the internet status, the router obtains an IPv6 address without an IPv4 address.
Available Solution:
The following beta versions have introduced 464XLAT support. It is suggested to install the specific version and check whether the reported issue can be fixed.
***Before downloading and updating the following beta firmware, please verify the model number and hardware version on the product label, especially the models with x.0, x.20, and x.30 versions. Please note that the x.0, x.20, and x.30 are different versions and are unable to use the same firmware.
| Archer NX600(EU)_V2 | Archer_NX600_V2_20250613_Beta |
| Archer NX200(EU)_V2 | Archer NX200_V2_20250430_Beta |
| Archer NX200(EU)_V1 | Archer NX200_V1_1.6.0_250529_Official |
| Archer MR600(EU) V3 | Archer_MR600(EU)_V3_250429_Beta |
| Archer MR600(EU) V2 | |
| Archer MR600(EU) V1 | Archer_MR600(EU)_V1_20231127_Beta |
| Archer MR500(EU) V1 | Archer_MR500(EU)_V1_250605_Beta |
| Archer MR400(EU) V4.30 | Archer_MR400(EU)_V4.30_230928_Beta |
| Archer MR200(EU) V6 | Archer_MR200(EU)_V6_24040425_Beta |
| Archer MR200(EU) V5 | Archer_MR200(EU)_V5_24040425_Beta |
| Archer MR200(EU) V5.20 | Archer_MR200(EU)_V5.20_230815_Beta |
| Archer MR200(EU) V5.30 | Archer_MR200(EU)_V5.30_230816_Beta |
| TL-MR6400(EU) V7 | TL-MR6400(EU)_V7_250515_Beta |
| TL-MR6400(EU) V5.30 | TL-MR6400(EU)_V5.30_230801_Beta |
| TL-MR6400(EU) V5.20 | TL-MR6400(EU)_V5.20_230815_Beta |
| TL-MR6400(EU) V5 | TL-MR6400(EU)_V5_20240425_Beta |
| TL-MR100(EU) V2 | TL-MR100(EU)_V2_240313_Beta |
Do let the community know how the beta version works. We are always happy to help.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Sunshine Any update on Tp-link MR-100..
- Copy Link
- Report Inappropriate Content
@Sunshine Kindly provide the solution for the jio SIM TP-Link. what is the solution of beta firmware, if only Jio sim works and others wont work.
If Jio changes something its should be mass boycott the jio sim, we all know. But since we have already purchased you device you should provide us the support for the same.
Provide some better firmware which works for all SIM , wha is the solution if only Jio works and other sim does not.
Please reframe this type of solution to cater specific needs where the other options not available.
I also raised the complain to the Jio ISP too about the SIM issues with our router and they are saying that we can not change only for TP-Link.
What a customer could do.
Either provide full proof solution or take your devices.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, previous beta firmware might not work with other SIM except for Jio, but the current beta firmware should work for both Jio and other SIMs, but since the new beta firmware is to solve Jio SIM issue, there is no need to install the beta firmware if users are using other SIMs.
If you have any further question or issue on your product, please let us know.
Diptir wrote
@Sunshine Kindly provide the solution for the jio SIM TP-Link. what is the solution of beta firmware, if only Jio sim works and others wont work.
If Jio changes something its should be mass boycott the jio sim, we all know. But since we have already purchased you device you should provide us the support for the same.
Provide some better firmware which works for all SIM , wha is the solution if only Jio works and other sim does not.
Please reframe this type of solution to cater specific needs where the other options not available.
I also raised the complain to the Jio ISP too about the SIM issues with our router and they are saying that we can not change only for TP-Link.
What a customer could do.
Either provide full proof solution or take your devices.
- Copy Link
- Report Inappropriate Content
What is the hardware version of your MR100?
As far as I know, the MR100 uses completely different chips, thus the solution is different from MR600/MR6400 etc., currently I don't have specific information about when MR100 could update firmware for this issue, once there is any more information, I will share on this thread.
- Copy Link
- Report Inappropriate Content
Hi, if your MR200 is V5.20 or V5.30, please try the beta firmware on Solution part of the original post, I just added MR200 V5.20&V5.30 and MR6400 V5.20 beta firmware today.
Note: For Jio SIM, if it is not plug and play, please remember to create APN profile manually and set PDP Type as XLAT.
PavanB wrote
@Sunshine When can we expect the firmware upgrade for MR200 v5?? If you require some details I can help. But please escalate it faster.
- Copy Link
- Report Inappropriate Content
@Sunshine Okay thanks, though I don't think I should tweak as Airtel 4G sim is working fine the only problem is Jio 5G sim is not working which I should get it replaced if I need Jio to work kn the router.
- Copy Link
- Report Inappropriate Content
@Sunshine Hi, I have MR200 V5.0, please release the beta firmware for v5.0.
- Copy Link
- Report Inappropriate Content
Sir please help.
Jio sim issue my router mr100.
Hardware - TL-MR100 v1 00000001
Firmware - 1.6.0 0.9.1 v0001.0 Build 221011 Rel.71875n
I use it for study purpose and I live in a village so I don't have any other options.
Please help
Thank you.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 49
Views: 124837
Replies: 463
Voters 7
