Solution 464XLAT Support on TP-Link 4G/5G routers for Jio/EE/Optus/Vodafone and other SIM carriers
This Article Applies to:
TP-Link 4G/5G routers
Background:
With More and more SIM service providers gradually implementing 464XLAT mechanism in their services, after inserting the SIM card into TP-Link 4G/5G routers, some users might report that there is no internet access or certain Apps/websites can't be accessed. When checking the internet status, the router obtains an IPv6 address without an IPv4 address.
Available Solution:
The following beta versions have introduced 464XLAT support. It is suggested to install the specific version and check whether the reported issue can be fixed.
***Before downloading and updating the following beta firmware, please verify the model number and hardware version on the product label, especially the models with x.0, x.20, and x.30 versions. Please note that the x.0, x.20, and x.30 are different versions and are unable to use the same firmware.
| Archer NX600(EU)_V2 | Archer_NX600_V2_20250613_Beta |
| Archer NX200(EU)_V2 | Archer NX200_V2_20250430_Beta |
| Archer NX200(EU)_V1 | Archer NX200_V1_1.6.0_250529_Official |
| Archer MR600(EU) V3 | Archer_MR600(EU)_V3_250429_Beta |
| Archer MR600(EU) V2 | |
| Archer MR600(EU) V1 | Archer_MR600(EU)_V1_20231127_Beta |
| Archer MR500(EU) V1 | Archer_MR500(EU)_V1_250605_Beta |
| Archer MR400(EU) V4.30 | Archer_MR400(EU)_V4.30_230928_Beta |
| Archer MR200(EU) V6 | Archer_MR200(EU)_V6_24040425_Beta |
| Archer MR200(EU) V5 | Archer_MR200(EU)_V5_24040425_Beta |
| Archer MR200(EU) V5.20 | Archer_MR200(EU)_V5.20_230815_Beta |
| Archer MR200(EU) V5.30 | Archer_MR200(EU)_V5.30_230816_Beta |
| TL-MR6400(EU) V7 | TL-MR6400(EU)_V7_250515_Beta |
| TL-MR6400(EU) V5.30 | TL-MR6400(EU)_V5.30_230801_Beta |
| TL-MR6400(EU) V5.20 | TL-MR6400(EU)_V5.20_230815_Beta |
| TL-MR6400(EU) V5 | TL-MR6400(EU)_V5_20240425_Beta |
| TL-MR100(EU) V2 | TL-MR100(EU)_V2_240313_Beta |
Do let the community know how the beta version works. We are always happy to help.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, thanks for the message.
I'm afraid there hasn't been a beta firmware for NX510v.
Furthermore, as I mentioned earlier, this is the service provider model, and the firmware is not allowed to be shared with the end users directly.
You can have a check with the local support team to see if they can offer any further assistance:
https://www.tp-link.com/in/support/contact-technical-support/#Hotline-Support
Sorry for the inconvenience.
Best regards.
- Copy Link
- Report Inappropriate Content
I posted in the forum (reply #503) three weeks ago, but haven’t received any response yet.
Can you please look into this?
I’m planning to purchase another MR600 in the next month or so and would like to confirm there is a solution before investing further in TP-Link 4G devices.
- Copy Link
- Report Inappropriate Content
MR 600 has the beta firmware, which have the xlat option. i tried this already. working with Jio.
- Copy Link
- Report Inappropriate Content
thanks,
the MR600 V2 one lists, it's the EU hardware, still ok to apply to Australia MR600 V2?
| Archer MR600(EU) V2 |
- Copy Link
- Report Inappropriate Content
Not sure on that. David can help on this, You can check what is your existing firmware? if if its EU should work with this
- Copy Link
- Report Inappropriate Content
Information
Helpful: 51
Views: 162081
Replies: 495
Voters 8
