@David-TP 

this 2026 delivered device:

Firmware Version: 1.4.0 0.9.1 v0001.0 

Build 220127 Rel.61306n

Hardware Version:

Archer MR600 v2 00000002

I also have a two-year-old device, still the MR600 v2. Last year when I tried to update it to the EU version, the update failed.

  @David-TP Hi, I'm experiencing the very same issues as listed in this older post: https://community.tp-link.com/en/home/forum/topic/817852?replyId=1552872;
I have a Digi.mobil PT SIM Card inserted on a router, more especifically the Archer MR550 router. I have no issues connecting to the Wi-Fi on my laptop and smartphones, but for some reason the streaming Apps on my Smart TV (Netflix, HBO Max, Disney+, Amazon Prime) get an error related to internet. On the other hand Apps like Browser, Youtube and Plex have access to internet and work wonderfully. 
I'm considering sending the router back completely, although I really don't want to, as otherwise it works nicely. 
I checked this post https://community.tp-link.com/en/home/forum/topic/604130 but there is no beta software I can install for my specific model.

I believe the issue might be related to MTU value, but I have no way of actually knowning or changing it. 

Thank you.

JJJ123 wrote

  @David-TP 

 

this 2026 delivered device:

 

Firmware Version: 1.4.0 0.9.1 v0001.0 

 

Build 220127 Rel.61306n

 

Hardware Version:

 

Archer MR600 v2 00000002

 

I also have a two-year-old device, still the MR600 v2. Last year when I tried to update it to the EU version, the update failed.

@JJJ123 

Use this method  (MR600v2 TPG-Vodafone Australia to EU)

1- Install firmware :
https://static.tp-link.com/upload/beta/2022/202208/20220812/Archer_MR600_V2_220810_AUTPG_to_EU.zip

2- Install EU firmware:
https://static.tp-link.com/upload/firmware/2022/202212/20221205/Archer_MR600(EU)_V2_220105.zip

When completed, Login to the MR600v2 and check for updates .

  @David-TP 

Do we have a beta firmware released for the Archer MR200(EU) v4.1?

  @David-TP 

The ISP is Jio.

I have tried IPV4, IPV6 and IPV4 & IPV6 as well but none worked. The IP address doesn't show up on IPv4. IP v6 shows connected but doesn't work.

All other providers work with this router except for Jio, which used to work before.

I believe a firmware update should fix it similar to the beta versions that have been releases for other routers.

  @David-TP Brother.i need that firmware update version Archer nx200 v2 .middile east version and global version because I purchased from Dubai . Eu version I tried but ther showing software mismatch. Plz shere that 464XLAT other region versions 

  @David-TP 

i have Archer NX210 V2.20    europe version

Jio 5G disconnecting frequently

Could you give me update

i am using Archer NX210(EU)_V2.20_1.3.0 Build 260311

  @David-TP 

Please provide 464XLAT Support beta firmware for Archer NX210(EU)_V2.20

I need for jio sim

  @amitkray31 
 

The "Registration denied by the visible network" error on Jio after a 5G upgrade is a known issue with older MR600 firmware — the router is trying to register on a network band that Jio has reconfigured as part of their 5G rollout and the older ISP profile doesn't match anymore.

A few things worth trying if you haven't already — go into the router's mobile settings and manually set the network mode to 4G only rather than auto, which stops it from attempting 5G registration it can't complete. Also check whether locking to a specific band (B3 or B40 for Jio typically) makes a difference since auto band selection sometimes latches onto a signal it can't actually authenticate on.

If TP-Link has released a newer firmware version specifically for the MR600 after your current build date it's worth flashing — Jio compatibility fixes have come through firmware updates for other models in this situation.

Worst case, contacting TP-Link support with your log file attached tends to get faster results than forum troubleshooting for carrier-specific registration issues since they can check if there's a known fix or updated APN profile for your ISP version.