Home

Forums

Stories

Knowledge Base

Home Network Community > Wi-Fi Routers > Unable to get stable HTTP connection through VPN

< Wi-Fi Routers

Unable to get stable HTTP connection through VPN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Unable to get stable HTTP connection through VPN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

tapioka

2023-05-07 04:30:06

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-05-07

Unable to get stable HTTP connection through VPN

2023-05-07 04:30:06

Tags: #VPN

Model: Archer AX53

Hardware Version: V1

Firmware Version: 1.1.3 Build 20221202 rel.37785(4A50)

As the title suggests, HTTP connections using cisco anyconnect are not stable.

Phenomenon that occurs

・VPN connection is stable

・Only connection using HTTP is unstable

　・The HTTP connection stops at intervals of about once every 10 minutes. After that, if I leave it for about 3 minutes, it will be restored.

・If I replace the router with another one, it will stabilize, so there is a high possibility that Archer is the cause.

Tryed

・I tried changing the Archer settings (pass-through, etc.), but no effect

　・IPv6 disable

　・All ALGs enabled

I'm looking for a problem with similar symptoms and a solution.

3 Reply

Kevin_Z

2023-05-08 05:59:29

Posts: 21587

Helpful: 5043

Solutions: 2543

Stories: 21

Registered: 2018-12-24

Re: Unable to get stable HTTP connection through VPN

2023-05-08 05:59:29

Hello @tapioka

Thank you for reaching out to us and welcome to the TP-Link community.

I'm wondering how you use the VPN Connection on the AX53. Do you configure and set up the AX53 as a VPN Server? Or you're connecting to a third-party VPN Server on a computer that is connected to the AX53 LAN? If it's the latter, please check and ensure the Passthrough settings (Advanced > Security > ALG) on the AX53 are enabled:

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer AX55V2 Supports WireGuard VPN, EasyMesh Ethernet Backhaul, IoT Network, Speed Limit,and More If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.

tapioka

LV1

2023-05-13 00:14:19

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-05-07

Re: Unable to get stable HTTP connection through VPN

2023-05-13 00:14:19

Hello @Kevin_Z

Thank you for your reply.

I want to connection to a third-party VPN Server on a computer that is connected to the AX53 LAN.

Specifically, it occurs when using the following products.

https://www.cisco.com/c/m/ja_jp/products/security/anyconnect/remote-access-vpn.html

I have already turned on the Passthrough settings you told me, but the same phenomenon occurs.

Kevin_Z

2023-05-16 06:53:00

Posts: 21587

Helpful: 5043

Solutions: 2543

Stories: 21

Registered: 2018-12-24

Re: Unable to get stable HTTP connection through VPN

2023-05-16 06:53:00

@tapioka

Thank you very much for getting back with the detailed info.

To assist and figure it out efficiently, I've forwarded your case to the TP-Link support engineers who will contact you with your registered email address later. Please pay attention to your email box for follow-up.

Unable to get stable HTTP connection through VPN

Unable to get stable HTTP connection through VPN

Information

Voters 0

Tags