Home Network Community > 5G/4G Wi-Fi Routers/MiFi > Lost LTE Signal Band After Upgrade
< 5G/4G Wi-Fi Routers/MiFi

Lost LTE Signal Band After Upgrade

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Lost LTE Signal Band After Upgrade

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Lost LTE Signal Band After Upgrade
Lost LTE Signal Band After Upgrade
2023-06-07 00:24:33 - last edited 2023-06-27 18:41:45
Tags: #Firmware Update #Band Selection
Model: TL-MR6400  
Hardware Version: V5
Firmware Version: 1.7.0 0.9.1 v0001.0 Build 230526 Rel.71835n_Beta

Hello

 

My Router TL-MR6400 v5.30 Not Showing Signal 4G LTE Since Upgrade Frimware 1.7.0 0.9.1 v0001.0 Build 230526 Rel.71835n_Beta

 

Here https://community.tp-link.com/en/home/forum/topic/604130

 

and Always Showing 3G Band and Not Stable mean long time to connect internet

 

When Select 4G Only

 

Im Downgare To Version TL-MR6400(EU)v5_1.5.0_0.9.1_[221121-rel62850]_up_boot_Release_2022-11-25_17.18.04

 

But Nothing Change :(

 

i hope help to fix this problem LTE 

 

 

This Log

 

2018-10-01 00:00:29 [6] 4G: ERROR: [band scan] Modem band seletion : 0x1a0000800c5. config band : 0x1a0000800c5

2018-10-01 00:00:29 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 00:00:29 [6] 4G: USER: The service status is limited.

2018-10-01 00:00:29 [6] 4G: USER: Not registered, searching!

2018-10-01 00:00:29 [6] 4G: USER: Network type is LTE.

2018-10-01 00:00:29 [6] 4G: ERROR: 0x00000047 QMI_ERR_INVALID_QMI_CMD

2018-10-01 00:00:29 [6] 4G: WARN: Sim card is inserted.

2018-10-01 00:00:29 [6] 4G: ERROR: 0x00000010 QMI_ERR_NOT_PROVISIONED

2018-10-01 00:00:29 [6] 4G: ERROR: Get sim card number failed (0).

2018-10-01 00:00:29 [6] 4G: USER: no need to init device sca

2018-10-01 00:00:29 [6] 4G: USER: GET_SMSC_ADDRESS response, value = +21350001701

2018-10-01 00:00:29 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 00:00:29 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 00:00:30 [5] 4G: init LTE module, set flowstat [enableDataLimit 0, enablePaymentDay 0, paymentDay 1, limitation 0, warningPercent 90]
2018-10-01 00:00:30 [5] 4G: LTE Module: profile num [1], default profile [1], active profile [0]
2018-10-01 00:00:30 [5] 4G: DM: profile num [0], default profile [0], active profile [0]
2018-10-01 00:00:40 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 00:00:43 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 00:00:43 [6] 4G: USER: Network type is WCDMA.

2018-10-01 00:00:44 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 00:00:44 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 00:00:44 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 00:00:45 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 00:00:45 [6] 4G: USER: The service is available.

2018-10-01 00:00:45 [6] 4G: USER: Registered with a network!

2018-10-01 00:00:45 [6] 4G: USER: Get ISP's profile now.

2018-10-01 00:00:45 [6] 4G: USER: GetCurrProf result is:ipver:2  staticApn:0  authType:2  pkgName:Nedjma  profname:Nedjma  apn:internet  usr:nedjma  psw:nedjma  

2018-10-01 00:00:45 [6] 4G: USER: Get ISP's profile now.

2018-10-01 00:00:45 [6] 4G: USER: GetCurrProf result is:ipver:2  staticApn:0  authType:2  pkgName:Nedjma  profname:Nedjma  apn:internet  usr:nedjma  psw:nedjma  

2018-10-01 00:00:45 [6] 4G: USER: Start connecting to the network!

2018-10-01 00:00:45 [6] 4G: USER: ModifyDefaultAttachProfileIP attach ip ver  equal to profile

2018-10-01 00:00:45 [6] 4G: USER: Get ISP's profile now.

2018-10-01 00:00:45 [6] 4G: USER: GetCurrProf result is:ipver:2  staticApn:0  authType:2  pkgName:Nedjma  profname:Nedjma  apn:internet  usr:nedjma  psw:nedjma  

2018-10-01 00:00:45 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 00:00:45 [6] 4G: USER: Get ISP's profile now.

2018-10-01 00:00:45 [6] 4G: USER: GetCurrProf result is:ipver:2  staticApn:0  authType:2  pkgName:Nedjma  profname:Nedjma  apn:internet  usr:nedjma  psw:nedjma  

2018-10-01 00:00:51 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 00:00:51 [6] 4G: USER: Get ISP's profile now.

2018-10-01 00:00:51 [6] 4G: USER: GetCurrProf result is:ipver:2  staticApn:0  authType:2  pkgName:Nedjma  profname:Nedjma  apn:internet  usr:nedjma  psw:nedjma  

2018-10-01 00:00:51 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 00:00:51 [6] 4G: USER: Get ISP's profile now.

2018-10-01 00:00:51 [6] 4G: USER: GetCurrProf result is:ipver:2  staticApn:0  authType:2  pkgName:Nedjma  profname:Nedjma  apn:internet  usr:nedjma  psw:nedjma  

2018-10-01 00:00:51 [6] 4G: ERROR: 0x0000000E QMI_ERR_CALL_FAILED

2018-10-01 00:00:51 [6] 4G: ERROR: Call end reason = 1018.

2018-10-01 00:00:51 [6] 4G: ERROR: Verbose Call end reason = 33, type = 6.

2018-10-01 00:00:51 [6] 4G: ERROR: 0x0000000E QMI_ERR_CALL_FAILED

2018-10-01 00:00:51 [6] 4G: ERROR: Call end reason = 1018.

2018-10-01 00:00:51 [6] 4G: ERROR: Verbose Call end reason = 33, type = 6.

2018-10-01 00:00:51 [6] 4G: WARN: APN is not correct, try switch profile.

2018-10-01 00:00:51 [6] 4G: ERROR: No more isp profile to switch.

2018-10-01 00:00:51 [6] 4G: ERROR: Switch profile or get current prof failed

2018-10-01 00:00:52 [6] 4G: USER: Fail to connect to the network, start autoconnect!

2018-10-01 00:00:52 [6] 4G: USER: Get ISP's profile now.

2018-10-01 00:00:52 [6] 4G: USER: GetCurrProf result is:ipver:2  staticApn:0  authType:2  pkgName:Nedjma  profname:Nedjma  apn:internet  usr:nedjma  psw:nedjma  

2018-10-01 00:00:52 [6] 4G: USER: ModifyDefaultAttachProfileIP attach ip ver  equal to profile

2018-10-01 00:00:52 [6] 4G: USER: Get ISP's profile now.

2018-10-01 00:00:52 [6] 4G: USER: GetCurrProf result is:ipver:2  staticApn:0  authType:2  pkgName:Nedjma  profname:Nedjma  apn:internet  usr:nedjma  psw:nedjma  

2018-10-01 00:00:53 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 00:00:53 [6] 4G: USER: Get ISP's profile now.

2018-10-01 00:00:53 [6] 4G: USER: GetCurrProf result is:ipver:2  staticApn:0  authType:2  pkgName:Nedjma  profname:Nedjma  apn:internet  usr:nedjma  psw:nedjma  

2018-10-01 00:00:53 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 00:00:53 [6] 4G: USER: Get ISP's profile now.

2018-10-01 00:00:53 [6] 4G: USER: GetCurrProf result is:ipver:2  staticApn:0  authType:2  pkgName:Nedjma  profname:Nedjma  apn:internet  usr:nedjma  psw:nedjma  

2018-10-01 00:00:53 [6] 4G: ERROR: 0x0000000E QMI_ERR_CALL_FAILED

2018-10-01 00:00:53 [6] 4G: ERROR: Call end reason = 1018.

2018-10-01 00:00:53 [6] 4G: ERROR: Verbose Call end reason = 33, type = 6.

2018-10-01 00:00:53 [6] 4G: ERROR: 0x0000000E QMI_ERR_CALL_FAILED

2018-10-01 00:00:53 [6] 4G: ERROR: Call end reason = 1018.

2018-10-01 00:00:53 [6] 4G: ERROR: Verbose Call end reason = 33, type = 6.

2018-10-01 00:00:53 [6] 4G: WARN: APN is not correct, try switch profile.

2018-10-01 00:00:53 [6] 4G: ERROR: No more isp profile to switch.

2018-10-01 00:00:53 [6] 4G: ERROR: Switch profile or get current prof failed

2018-10-01 00:00:53 [6] 4G: USER: Fail to connect to the network, start autoconnect!

2018-10-01 00:00:53 [6] 4G: USER: Get ISP's profile now.

2018-10-01 00:00:53 [6] 4G: USER: GetCurrProf result is:ipver:2  staticApn:0  authType:2  pkgName:Nedjma  profname:Nedjma  apn:internet  usr:nedjma  psw:nedjma  

2018-10-01 00:00:57 [6] 4G: USER: ModifyDefaultAttachProfileIP attach ip ver  equal to profile

2018-10-01 00:00:57 [6] 4G: USER: Get ISP's profile now.

2018-10-01 00:00:57 [6] 4G: USER: GetCurrProf result is:ipver:2  staticApn:0  authType:2  pkgName:Nedjma  profname:Nedjma  apn:internet  usr:nedjma  psw:nedjma  

2018-10-01 00:00:58 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 00:00:58 [6] 4G: USER: Get ISP's profile now.

2018-10-01 00:00:58 [6] 4G: USER: GetCurrProf result is:ipver:2  staticApn:0  authType:2  pkgName:Nedjma  profname:Nedjma  apn:internet  usr:nedjma  psw:nedjma  

2018-10-01 00:00:59 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 00:00:59 [6] 4G: USER: Get ISP's profile now.

2018-10-01 00:00:59 [6] 4G: USER: GetCurrProf result is:ipver:2  staticApn:0  authType:2  pkgName:Nedjma  profname:Nedjma  apn:internet  usr:nedjma  psw:nedjma  

2018-10-01 00:00:59 [6] 4G: ERROR: 0x0000000E QMI_ERR_CALL_FAILED

2018-10-01 00:00:59 [6] 4G: ERROR: Call end reason = 1018.

2018-10-01 00:00:59 [6] 4G: ERROR: Verbose Call end reason = 33, type = 6.

2018-10-01 00:00:59 [6] 4G: ERROR: 0x0000000E QMI_ERR_CALL_FAILED

2018-10-01 00:00:59 [6] 4G: ERROR: Call end reason = 1018.

2018-10-01 00:00:59 [6] 4G: ERROR: Verbose Call end reason = 33, type = 6.

2018-10-01 00:00:59 [6] 4G: WARN: APN is not correct, try switch profile.

2018-10-01 00:00:59 [6] 4G: ERROR: No more isp profile to switch.

2018-10-01 00:00:59 [6] 4G: ERROR: Switch profile or get current prof failed

2018-10-01 00:00:59 [6] 4G: USER: Fail to connect to the network, start autoconnect!

2018-10-01 00:00:59 [6] 4G: USER: Get ISP's profile now.

2018-10-01 00:00:59 [6] 4G: USER: GetCurrProf result is:ipver:2  staticApn:0  authType:2  pkgName:Nedjma  profname:Nedjma  apn:internet  usr:nedjma  psw:nedjma  

2018-10-01 00:01:03 [6] 4G: USER: lte_sms_status_valid invalid .

2018-10-01 00:01:03 [6] 4G: USER: Get ISP's profile now.

2018-10-01 00:01:03 [6] 4G: USER: GetCurrProf result is:ipver:2  staticApn:0  authType:2  pkgName:Nedjma  profname:Nedjma  apn:internet  usr:nedjma  psw:nedjma  

2018-10-01 00:01:07 [6] 4G: USER: ModifyDefaultAttachProfileIP attach ip ver  equal to profile

2018-10-01 00:01:07 [6] 4G: USER: Get ISP's profile now.

2018-10-01 00:01:07 [6] 4G: USER: GetCurrProf result is:ipver:2  staticApn:0  authType:2  pkgName:Nedjma  profname:Nedjma  apn:internet  usr:nedjma  psw:nedjma  

2018-10-01 00:01:07 [6] 4G: ERROR: 0x0000000E QMI_ERR_CALL_FAILED

2018-10-01 00:01:07 [6] 4G: ERROR: Call end reason = 1.

2018-10-01 00:01:07 [6] 4G: ERROR: Verbose Call end reason = 1078, type = 3.

2018-10-01 00:01:12 [6] 4G: ERROR: 0x0000000E QMI_ERR_CALL_FAILED

2018-10-01 00:01:12 [6] 4G: ERROR: Call end reason = 1.

2018-10-01 00:01:12 [6] 4G: ERROR: Verbose Call end reason = 1078, type = 3.

2018-10-01 00:01:13 [6] 4G: USER: Fail to connect to the network, start autoconnect!

2018-10-01 00:01:13 [6] 4G: USER: Get ISP's profile now.

2018-10-01 00:01:13 [6] 4G: USER: GetCurrProf result is:ipver:2  staticApn:0  authType:2  pkgName:Nedjma  profname:Nedjma  apn:internet  usr:nedjma  psw:nedjma  

 

  0      
 
  0      
 
#1
Options
4 Reply
Re:Lost LTE Signal Band After Upgrade
2023-06-07 01:48:18

  @TitoX 

 

Hi, may I know if you are using India Jio 5G SIM card? The beta firmware you've updated is for India Jio 5G SIM card only.

 

Here is the note for the beta firmware in the thread: India Jio SIM stops working on TP-Link LTE Gateway Routers after upgrading to 5G

 

1) After updating the above beta firmware, 5G Jio SIM will work, but SIM cards from other ISPs might not work properly even after downgrading to previous firmware, so if you would like to use 5G Jio SIM for internet access, please update the above beta firmware, if not, please don't update it and continue using previous firmware.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Lost LTE Signal Band After Upgrade
2023-06-09 09:19:29

Hello @Sunshine

 

Any New Global Frimware Fix LTE Bands After Jio Update

 

 

 

 

  0  
  0  
#4
Options
Re:Lost LTE Signal Band After Upgrade
2023-06-28 11:51:21

  @Sunshine 

.

 

Any Beta Update To Fix Jio Frimware 

  0  
  0  
#8
Options
Re:Lost LTE Signal Band After Upgrade
2023-07-03 20:42:09

I CANT LOCK ANY BAND :( 

  0  
  0  
#10
Options

Information

Helpful: 0

Views: 1417

Replies: 4

Tags

Firmware Update Band Selection
Related Articles
Manual Band selection
739 0
 Dual Band LTE
189 0
 MR6400 - Upgrade problem! Don´t upgrade
139 0
 How to check LTE / 4G band, signal strength
2515 0
 Best sequence to troubleshoote weak 4G signal?
666 0
Lost detachable LTE Antenna(MR400)
668 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.