Official Release Deco BE85/BE95_1.0.18 Optimizes the Overall Network Speed and Stability.
This Article applied to:
Deco BE85_V1/V2;Deco BE95_V1
Download Links
| Deco BE85_V1_1.0.18_Build_20240409 |
| Deco BE85_V2_1.0.18_Build_20240409 |
| Deco BE95_V1_1.0.18_Build_20240410 |
How to manually update the firmware via web UI: How to Update the Firmware of Deco.
Modifications and Bug Fixes:
1. Improved the stability of the system.
2. Added the IoT Network information on the web management interface.
3. Fixed the bug that the USB sharing feature shows wrong size of the USB drive in some cases.
4. Fixed the bug that the Online Client list shows 0 client in some cases.
5. Fixed the bug that the 6G SSID is empty in some cases.
6. Fixed the known bugs related with Samsung S24 Ultra which might lead to the crash and auto-reboot on the Deco side.
7. Fixed the bug that MLO Wi-Fi might lead to the Deco crash or auto-reboot under some special settings.
8. Fixed the bug that the PPPoE connection failed to dial up after turning the IPTV VLAN feature.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, Thanks very much for your suggestions.
The engineers are indeed going to update the beta firmware with the latest official version's fixes. It should be ready in the next few days.
Best regards.
- Copy Link
- Report Inappropriate Content
Hi, Thanks for the update.
The official firmware hasn't added it yet but the new 1.0.13 beta I just updated is based on the official 1.0.13 version.
Best regards.
- Copy Link
- Report Inappropriate Content
@David-TP Thanks for the update! It definitely takes care of the issue with data transfers/large downloads.
Hopefully an official version is available soon.
- Copy Link
- Report Inappropriate Content
@David-TP I see 1.0.14 Build 20231124 has been released and one of the fixes mentions "Fixed the bug that file downloads were failing in some cases.". Is this the officla fix for the issue in this thread?
- Copy Link
- Report Inappropriate Content
So far so good here with the official 1.0.0.14, waiting for an official confirmation that it contains the fix.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Mine does the same through the app.
You can download the firmware from the website and update manually by logging into the router through your browser with tplinkdeco.net
https://www.tp-link.com/us/support/download/deco-be85/v2/#Firmware
- Copy Link
- Report Inappropriate Content
Though I haven't seen an official statement, version 1.0.14 Build 20231124 from the website behaves like the beta firmware I was on. It resolves the download issues I was having when I initially reported the issue.
- Copy Link
- Report Inappropriate Content
so i am in my broswer via wifi connected to my tplinkdeco site. I went to upgrade with my downloaded `be85 2.0_US_1.0_EU_en_1.0.14 Build 20231124 Rel. 32537_up.bin`. it said it would upload and reboot my routers. however, it hasn't done that and its been a few hours. I thought this manual update was pretty quick, but it seems to not doing anything. I get an operation successful, but nothing is actually happening. I have tried rebooting my router, but that didn't do anything.
Do i need to do anything else after I click upgrade?
- Copy Link
- Report Inappropriate Content
Can you still connect to your router and access the router interface? You should be up and running again in less than 5 minutes.
I assume you have the v2 router and flashed tbe correct firmware?
You can try factory resetting your router and trying again. There should be a button on the bottom of the router.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 6051
Replies: 34
Voters 1
