Official Release EasyMesh Range Extenders Start Supporting Building a EasyMesh Network via Ethernet Backhaul
This Article Applied to:
| RE315_V1 | 1.0.30 Build 230919 or later |
| RE700X(US)_V2 | 1.2.4 Build 20250304 |
| RE705X(US)_V2 | 1.2.0 Build 20241210 |
| RE705X(TW,CA)_V2 | 1.2.6 Build 20250428 |
| RE705X(KR)_V2 | 1.2.6 Build 20250605 |
| RE600X(UK,JP,AS)_V3 | 1.2.4 Build 20250304 |
| RE605X(UK,JP,AS)_V3 | 1.2.4 Build 20250304 |
| RE900XD_V1 | 1.0.10 Build 20240411 |
| RE6000XD(DE)_V1 | 1.0.10 Build 20240411 |
| RE715X_V2 | Supported on the factory firmware. |
| RE615X(US)_V2 | |
| RE600X(US/CA) _V4 | |
| RE605X(US/CA) _V4 | |
| RE655BE_V1 | |
| RE235BE_V1 | |
| RE220BE_V1 | |
| RE405BE(EU/US)_V1 |
What is EasyMesh with Ethernet Backhaul and Why we need it?
EasyMesh with Ethernet Backhaul refers to the Main router and the satellite device are connected via an Ethernet cable to establish an EasyMesh network. Ethernet Backhaul offers a more reliable and faster option compared to EasyMesh with Wi-Fi, ensuring a robust and efficient EasyMesh network setup.
How to create EasyMesh with Ethernet Backahul?
Pre-configuration Notice:
1.Ethernet Backhaul is supported only when both your main router and satellite extender support EasyMesh with Ethernet Backhaul.
>>Router Support List of EasyMesh with Ethernet Backhaul
2.The extender needs to be under wireles range extender mode, not Access Point.
3.Once the Ethernet backhaul is successfully established, the wireless backhaul will be automatically disconnected. Conversely, if the Ethernet backhaul connection gets interrupted, the devices will automatically reestablish the mesh network using the wireless backhaul.
Scenario 1: Change wireless backhaul to Ethernet backhaul
Scenario 2: Add a new satellite Range Extender to EasyMesh
EasyMesh with Ethernet Backhaul stars with RE315_V1, which features an Ethernet Port with a speed of up to 100 m/s. This functionality will gradually be extended to other EasyMesh-supported extenders. We encourage you to share your feedback below regarding your current models of EasyMesh extenders and routers. This feedback will help us prioritize the implementation of EasyMesh on different product models.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Same here, any ETA on where we would get backhaul by ethernet?
- Copy Link
- Report Inappropriate Content
@banc I'm interested too... I have a GE800 and two RE800 but easy mesh ethernet backhaul don't work. I had to set the 2 repeater as access point but it isn't the same thing.
- Copy Link
- Report Inappropriate Content
@teoteo82 yes in my case I connected my RE800BE in access point mode using 10G backend to my GE800. So this is also not a great solution but has to do until the planned release with ethernet backhaul for the RE800BE ist available.
I am also very disappointed that TP Link doesn't bother at all to react to our messages in this thread but unfortuneatly have also no other news thus far.
- Copy Link
- Report Inappropriate Content
@David-TP any news when RE800BE support will arrive?
- Copy Link
- Report Inappropriate Content
Hi, thank you very much for your time and patience.
Have you checked the local online stores?
I see RE800BE is available on Amazon.de:https://www.amazon.de/-/en/RE800BE-Amplifier-Repeater-Tri-Band-Maximised/dp/B0DCW6K8FS
Best regards.
- Copy Link
- Report Inappropriate Content
Same question... I have GE800 and 2 RE800 but ethernet backhaul don't work... works only in accespoint mode on RE800 but it's not the same thing and I don't want to use wifi mesh
- Copy Link
- Report Inappropriate Content
@David-TP thanks for your message. Yes I already own a RE800BE and GE800. My question is concerning when we will finally get Ethernet backhaul for the RE800BE to connect with the GE800? It was marked as "planned" in this thread for a while now and the RE800BE still runs firmware v1 without any updates at all since launch.
- Copy Link
- Report Inappropriate Content
.- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, there is still a plan to support Ethernet Backhaul on the RE800BE. The engineer explained that RE800BE needs to be updated to an entirely new firmware platform to introduce this feature, which will take more time.
Thanks a lot for your time and patience.
Best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 7
Views: 43469
Replies: 137
Voters 4
