Home Network Community > Wi-Fi Routers > BE800 SFP 2.5G Mode
< Wi-Fi Routers

BE800 SFP 2.5G Mode

12

BE800 SFP 2.5G Mode

BE800 SFP 2.5G Mode
BE800 SFP 2.5G Mode
2024-03-04 13:07:54
Tags: #Firmware Update #SFP+
Model: Archer BE800  
Hardware Version: V1
Firmware Version: 1.0.12 Build 20231117 rel.33787(5553)

I have a GPON SFP which supports a maximum link of 2.5G but when I am connecting it to BE800 it only connects at 1G link

  0      
 
  0      
 
#1
Options
12 Reply
Re:BE800 SFP 2.5G Mode
2024-03-04 20:31:52
10Gtek 10 Gigabit SFP+ LC Multi-Mode Transceiver, 10GBASE-SR Module for Cisco SFP-10G-SR, Meraki, Ubiquiti unifi UF-MM-10G, Mikrotik,D-Link, Supermicro, Netgear, TP-Link, Broadcom(850nm, DDM, 300m) i used this spf+ in 2.5 gb switch with 10 gb sfp+ it should work in tplink connect at 2.5 up to 10 if spf port it might not mybe this work but not sure
  0  
  0  
#2
Options
Re:BE800 SFP 2.5G Mode
2024-03-05 07:15:11

  @SpeedxThunder 

 

Thank you very much for the feedback.

May I know your who your ISP is and the model no. of your GPON SFP? And it is connected to SFP+ port of the BE800, right?

Please also share with us screenshot of the Ethernet Status on the BE800 web interface: Network Map->Archer BE800.

If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#3
Options
Re:BE800 SFP 2.5G Mode
2024-03-05 11:49:04 - last edited 2024-03-05 11:53:34

  @SpeedxThunder Currently I can't share the web UI screenshot but it shows 1000MBps in sfp interface instead of 2500Mbps

 

I have 2 SFP ODI/HSGQ DFP-34X-2C2 (chipset: Realtek RTL9601D) which doesn't even connect at 2.5gbps and another FS GPON-ONU-34-20BI(Chipset: Lantiq PEB98035) which randomly connects to 2500Mbps like 2-3 out of 10 times and I am using it with Airtel Xstream Fiber connection

i am facing too much trouble due to this

  0  
  0  
#4
Options
Re:BE800 SFP 2.5G Mode
2024-03-06 10:11:07

  @SpeedxThunder 

 

To assist you efficiently, I've forwarded your case to the TP-Link support engineers who will contact you with your registered email address later. Please pay attention to your email box for follow-up.

If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#5
Options
Re:BE800 SFP 2.5G Mode
2024-04-03 16:29:03

  @SpeedxThunder I was using 1.0.6 debug firmware to make 2.5g work but it auto-updated to 1.1.1 and now I cant even downgrade to older firmware and I am back at 1g link speed

  0  
  0  
#6
Options
Re:BE800 SFP 2.5G Mode
2024-04-07 02:09:02

  @SpeedxThunder 

 

Hi, please reply senior engineer's email to report the issue again, they will check if there is any new debug firmware or any other solution.

If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#7
Options
Re:BE800 SFP 2.5G Mode
2024-04-08 13:08:58

  @Sunshine i had already replied back to the original mail 1 week ago but haven't got any reply

  0  
  0  
#8
Options
Re:BE800 SFP 2.5G Mode
2024-04-09 01:47:01

  @SpeedxThunder 

 

Hi, upon checking with the senior engineer, he just received a reply yesterday and will continue to follow up on your case. Please wait for the senior engineer's email.

If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#9
Options
Re:BE800 SFP 2.5G Mode
2024-04-16 22:05:29

  @SpeedxThunder 

 

Hello, I am having the same exact issue with my BE800 and FS GPON-ONU-34-20BI. I had it working at 2.5gbps for around a week but today it dropped to 1gbps, I tried setting the internet port negotiation speed to 2.5 to no avail:

 

  0  
  0  
#10
Options
Re:BE800 SFP 2.5G Mode
2024-04-18 06:18:00

  @Frefo 

 

Thanks very much for the feedback!

May I know who is your ISP(internet service provider)?  Please share both hardware and firmware version of your Archer BE800.

  0  
  0  
#11
Options
12

Information

Helpful: 0

Views: 743

Replies: 12

Tags

Firmware Update SFP+
Related Articles
SFP access through BE800
287 0
Archer BE800 : SFP+ optical module ?
444 0
Does Archer BE800 support Client Mode?
316 0
BE800 - 2.4g unstable
246 0
BE800 --> BE550 Ethernet Backhaul
111 0
BE800 not supporting wired backhaul in easymesh mode
323 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.