Background Details:

I had a severe need to install a Flume leak detector at the water meter which is some 300ft away from the house on the drive which is not within line of sight, in a cement box with a hill between the unit and the house also. Internally and an X50 on the roof of the house I still couldn’t get a signal to stay up with the receiver. As a last resort, I decided to try a second X50 mounted on a shed some 200ft from the house and bam… up and running with a clear uninterrupted Wi-Fi signal into the meter hole which was a further 100+ft away.

---Quoted from Deco X50-Outdoor Amazon User Review

The Challenge:

How to mount Deco X50-Outdoor to transmit signal for a 300ft distance?

Solution: The Daisy-Chain topology

Internet---<cable>---Deco X50(In the house) ---<Wi-Fi>---1st Deco X50-Outdoor(mounted on the roof)------<Wi-Fi>---2nd Deco X50-Outdoor(mounted on a shed in the half way of barn)

The mounting Tips for Deco X50-Outdoor

• Self-tapping screws: ST3.5 * 30 pan head self-tapping screw, with a head diameter of D6 (must not exceed D8) and a head thickness of 1.8 mm(must not exceed 3).
• Plastic wall anchors: D6 (outer diameter) * 30 mm(length).
• Screws of the base plate: M2.5(diameter) 7.5(length); Screw head: D4.2(diameter) 1.5(length)

*All dimensions are in millimeters (mm).