Error code 4503, The uploaded file was not accepted (router AX1500 wifi-6)
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I am trying to update the firmware of my TP Link router AX1500 and getting this error message.
I have downloaded it from TP link website. the downloaded firmware version is - Archer AX1500(EU)_v1.20_220401
Need help for same.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Did you verify the model number and version of your router with the label on the underside of the unit? The firmware version at the top of your post doesn't look right unless it is a special firmware for the Archer AX1500 from an ISP
From which Tp-Link site did you download the new firmware. I checked the worldwide and several EU sites and I didn't see the firmware you downloaded.
One last thing... Did you forget to unzip the downloaded firmware before attempting to upload it to the router?
- Copy Link
- Report Inappropriate Content
Hi,
Check again what is printed on your router's label, like jra11500 suggested.
I think you router might be the model "EX220-G2u", but not "Archer AX1500".
- Copy Link
- Report Inappropriate Content
Did you verify the model number and version of your router with the label on the underside of the unit? The firmware version at the top of your post doesn't look right unless it is a special firmware for the Archer AX1500 from an ISP
From which Tp-Link site did you download the new firmware. I checked the worldwide and several EU sites and I didn't see the firmware you downloaded.
One last thing... Did you forget to unzip the downloaded firmware before attempting to upload it to the router?
- Copy Link
- Report Inappropriate Content
@rsonone42
Hi I have verified the firmware version from the default router page 192.168.0.1
and downloaded firmware from tp-link website
https://www.tp-link.com/in/support/download/archer-ax1500/#Firmware
- Copy Link
- Report Inappropriate Content
@rsonone42
And I have unzipped fodder and selecting, .bin file to upload on firmware update.
- Copy Link
- Report Inappropriate Content
It looks like you have done everything correctly. There is newer firmware on the global site and here is the link. If the latest firmware also fails to load, you should contact your local Tp-Link support representative.
- Copy Link
- Report Inappropriate Content
Hi,
Check again what is printed on your router's label, like jra11500 suggested.
I think you router might be the model "EX220-G2u", but not "Archer AX1500".
- Copy Link
- Report Inappropriate Content
@rsonone42
Yes I check the label my model is EX220-G2u,
Now my question is. Can I use it as wifi range extender (not wired). I know by default its not there, but after any firmware update is it possible?
Thanks.
- Copy Link
- Report Inappropriate Content
Hi, as EX220-G2u is a customized model for ISPs only. The firmware release is not decided by TP-Link.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 869
Replies: 7
Voters 0
No one has voted for it yet.