VPN on ER605 V2, with failover configured

VPN on ER605 V2, with failover configured

VPN on ER605 V2, with failover configured
VPN on ER605 V2, with failover configured
2024-06-14 22:49:00
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version:

Hello, good afternoon, I am trying to make an implementation to access a device remotely, but without needing to have a public IP, since both internet providers give me internet through DHCP, and I have thought about a DDNS that detects me when The main link goes down and I update the IP to the secondary one, but I can't get the DDNS to connect, that is, it doesn't detect any IP. Port forwarding is necessary to reach each device I require.

  0      
  0      
#1
Options
1 Reply
Re:VPN on ER605 V2, with failover configured
2024-06-16 06:06:53

Hi  @joaquin18 

IPsec failover. That should be what you need to consider.

But anyway, you still need to have a public IP on each end.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update!Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting Manual ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. Don't be a lazy asker. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#2
Options