Home

Forums

Stories

Knowledge Base

Home Network Community > 5G/4G Wi-Fi Routers/MiFi > TL-MR100 Ports etc.

< 5G/4G Wi-Fi Routers/MiFi

TL-MR100 Ports etc.

raejinn96

2024-06-28 01:24:49

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-06-28

TL-MR100 Ports etc.

2024-06-28 01:24:49

Tags: #Network Connectivity #Band Selection

Model: TL-MR100

Hardware Version: V1

Firmware Version: 1.2

Hi I'm new to Routers, network, IT knowledge in general, I wanna ask several questions. I have this setup where my TL-MR100 is become an access point from another router (from another brand), since I use my LAN1 as an input from the main router, how can I connect my PC using ethernet cable to my TL-MR100?

Does the only way is by buying a network switch?
Then what does LAN2/WAN port is for in general?

Also does my TL-MR100 can receive 5G Band frequency?

Thank you in advance

1 Reply

Joseph-TP

2024-06-28 07:49:08

Posts: 514

Helpful: 37

Solutions: 54

Stories: 0

Registered: 2024-06-22

Re:TL-MR100 Ports etc.

2024-06-28 07:49:08

@raejinn96

It seems that you want to configure TL-MR100 in wireless router mode, so you may need to connect the main router to the LAN2/WAN port of MR100 via wire. The configuration method is as follows:
1. Log into the Web UI via http://tplinkmodem.net.
2. Go to Advanced -> Operation Mode and select Wireless Router Mode.
3. Go to Advanced -> Network -> Internet, then click "Add" to configure the corresponding Internet parameters, and ensure the Internet works with the Ethernet WAN connection.

After successful configuration, you could connect LAN 1 port to the PC using an Ethernet cable.

By the way, TL-MR100 only supports 4G and below.

raejinn96

2024-06-28 01:24:49

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-06-28

Information

Helpful: 0

Replies: 1

TL-MR100 Ports etc.

TL-MR100 Ports etc.

Information

Voters 0

Tags