Home

Forums

Stories

Knowledge Base

Home Network Community > Wi-Fi Routers > Connecting VOIP to router or modem in bridge mode?

< Wi-Fi Routers

Connecting VOIP to router or modem in bridge mode?

Connecting VOIP to router or modem in bridge mode?

Connecting VOIP to router or modem in bridge mode?

2024-07-04 02:29:25 - last edited 2024-07-05 02:42:16

Posts: 8

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2024-07-04

Connecting VOIP to router or modem in bridge mode?

2024-07-04 02:29:25 - last edited 2024-07-05 02:42:16

Tags: #Installation

Model: Archer AX55 Pro

Hardware Version: V1

Firmware Version:

Hi there,

Is there a way to connect a RJ11 connected VOIP phone to a 2nd router (i.e. VR2100v) configured in bridge/AP mode?

For Example in order of preference:

1) Main router (Archer AX55 Pro) wired to the 2nd modem/router (VR2100v with RJ11 input) connected directly to the DECT phone.

2) Main router (Archer AX55 Pro) wired to the 2nd modem/router (VR400 without RJ11 input) connected indirectly to the DECT phone via an ATA.

3) Main router (Archer AX55 Pro) indirectly connected to DECT phone via an ATA and wired to the 2nd router (VR400).

Does the AX55 even have telephony capabilities for this task?

Thank you in advance.

0

0

#1

4 Reply

2024-07-05 02:56:21

Posts: 1870

Helpful: 132

Solutions: 268

Stories: 0

Registered: 2022-05-09

Re:Connecting VOIP to router or modem in bridge mode?

2024-07-05 02:56:21

Hi, thanks for posting question here.

I am afraid that Archer AX55 Pro is a common wireless router, it have no any function related to VoIP.

You may use Archer VR2100v directly and set up VoIP feature following this guide.

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.

0

0

#2

LV1

2024-07-05 03:55:17 - last edited 2024-07-05 03:56:24

Posts: 8

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2024-07-04

Re:Connecting VOIP to router or modem in bridge mode?

2024-07-05 03:55:17 - last edited 2024-07-05 03:56:24

Thanks for your response.

So just to be clear, the VR2100v will not be able to deliver it's telephony capabilities if it is in AP mode?

I.e. Does the VR2100v have to be the root router in order to deliver VOIP or can it be the 2nd router and still work for VOIP

0

0

#3

LV7

2024-07-05 11:05:43

Posts: 7017

Helpful: 5225

Solutions: 1159

Stories: 7

Registered: 2013-10-12

Re:Connecting VOIP to router or modem in bridge mode?

2024-07-05 11:05:43

VR2100v according its specs has two operating modes: DSL modem router and Wireless router.

To configure VoIP services VR2100v should be used in DSL modem router mode and it has to be the main router.

If the router doesn't have VoIP capabilities then you should use an ATA device to be able to use the VoIP services provided by the ISP.

When using an ATA device it shouldn't matter whether it's connected to the main router or a second device in AP mode.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".

1

1

#4

LV1

2024-07-05 11:17:33

Posts: 8

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2024-07-04

Re:Connecting VOIP to router or modem in bridge mode?

2024-07-05 11:17:33

Brilliant, thank you very much for this answer.

0

0

#5