Hello, my BE800 has issues with unstable wireless and wired WAN 10G/SFP and LAN 10G connections dropping.
Is there a latest BETA firmware available for update?

Since purchasing this BE800, there have been persistent issues. Every firmware version released by you has been updated, but the following problems remain:

For the wireless network, adjusting the signal seems ineffective and significantly deviates from your official website's description.

I hope users can adjust signal power (using numerical ratios rather than small, medium, large options) and increase the adjustable power to the country's maximum (this BE800 version is US1.0 imported from the United States). Also, please allow for country selection adjustment.

The wired network has compatibility issues.

1.Whenever using WAN 10G RJ45 to connect to the modem (ISP is Chunghwa Telecom and using PPPOE dial-up),

there is a high probability of disconnection or failure to connect, or connection with no network at all.

It is necessary to place a SWITCH in between to use it normally.

2.

The 10G LAN RJ45 frequently disconnects when connected to a 10G network card (Intel X550-T2 network card),
but the Intel X550-T2 only disconnects when connected to BE800; it remains stable when connected to SWITCH or other 10G routers."