Beta Software Improve the Overall System Stability of Archer BE550/BE800
This Article Applies to:
Archer BE550 V1
Archer BE9300 V1
Archer BE800 V1
Archer GE800 V1
Overview
We hope to offer you a chance to experience the pre-released version of firmware for our Wi-Fi 7 routers, and also give us TP-Link the opportunity to fully test the firmware in your real network environment and scenarios before the official release. All feedback is welcome, including letting us know about successful upgrades.
Modifications
Improved the overall system stability.
Firmware Download
Before the Upgrade
(1) Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
(2) For the sake of insurance, it's always recommended to save a copy of the router Backup Config file before upgrading or downgrading.
(3) You may follow the guide to upgrade the firmware of your router. How to Upgrade the Firmware on the TP-Link Wi-Fi Routers.
(4) If you still receive a new firmware update notification on the router's web interface or the Tether App after installing the beta software, it's recommended that you do not upgrade to the new firmware at this time. Instead, please stay on the provided beta version until you are ready to leave this beta software testing.
Direct Firmware Download Link
Archer BE550_V1_1.0.11 Build 240801 (Beta Version)
Archer BE9300_V1_1.0.8 Build 240417 (Beta Version)
Archer BE800_V1_1.1.6 Build 240711 (Beta Version)
Archer GE800_V1_1.1.3 Build 240527 (Beta Version)
Additional Information
As always, we value your feedback. If somehow you encounter an issue during or after the router firmware upgrade, it's suggested to comment below with the following info. Your input helps us continue improving and providing the best products and support.
- Model, hardware version, and firmware version of your router.
- Detailed issue description, and provide more information on the specific conditions that seem to trigger the problem.
Update Log
Sep 24th, 2024:
Added two related articles of the latest official firmware release for the mentioned models.
Aug 2nd, 2024:
Update and provide a new 1.0.11 beta version.
Jul 31th, 2024:
Removed the beta firmware for Archer BE550 V1. We will update and provide a new beta version very soon. Please wait.
Jul 25th, 2024:
Provided an updated beta firmware for Archer BE800 V1.
Jul 24th, 2024:
Release of the post
Recommended Threads
Archer BE800/BE9300 New Software Enhances System Stability and Optimizes MLO Network Stability
Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
To be honest nothing its fixed for 100% in 1.0.11 firmware :D and 0 new features.
But to comapre to other firmwares for sure its much better overall strengh signal on all bands. And work a bit more stable.
Also in my opinion this is the best firmware what we got for now, even with this huge amount of bugs what they need fix asap ^^"
- Copy Link
- Report Inappropriate Content
I'm currently using the official release 1.0.10 build. How is it on Ethernet backhaul? Did the range improved on be550? Thanks!
- Copy Link
- Report Inappropriate Content
Hey, yep on 1.0.11 range its better than 1.0.9 firmware. i cannot do full test of 1.0.10 firmware becouse was buggy and ethernet backhaul dont work there, thats why they remove it.
So in my expirance on 1.0.11 fimware has the best range in all bands if I compare to previous firmwares. Also ethernet backhaul works again.. but.. i notice some bugs if you have second BE550v1 as satellite. Routers alone can switch canal/width channel. But If i use BE550v1 alone works fine or with other sattlite router example: AX55. also works fine. I still investigate it.
- Copy Link
- Report Inappropriate Content
when I change the main router to 80hz, the satellite still on 160hz. The satellite follow the channel change. This setting on easymesh.
- Copy Link
- Report Inappropriate Content
@SmartTP I reported the same issue here:
https://community.tp-link.com/en/home/forum/topic/681698
I was told via email that channel width propagation isn't part of the Easy mesh spec (haven't double checked myself) but honestly I think it's bug. Channel doesn't propagate to satellites either which is for-sure part of the spec.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
If the main router can change the channel of the satellite why width wasn't affected? 80mhz is better suited on a congested place as it get less interference. I get better stability on 80 over 160 and stronger signal. I hope they fix this width as I don't need 160.
- Copy Link
- Report Inappropriate Content
Just curious on the beta firmware do I upload the be9300 firmware or the be550 cheers.
- Copy Link
- Report Inappropriate Content
I believe your router model should be BE550. You may verify that by checking the router label, where you should be able to find the exact model No.
BE9300 refers to the wireless standard.
- Copy Link
- Report Inappropriate Content
Football_Dave wrote
@Football_Dave Sorry. I assume there is no newer beta software at the moment.
As far as I can confirm, Marvin has escalated your case to our support engineers, and I believe they will be able to investigate this further and provide a quick solution. Please check your email box and discuss this with them directly. Thank you.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 3
Views: 11358
Replies: 103
Voters 2
