Home

Forums

Stories

Knowledge Base

Home Network Community > Wi-Fi Routers > LAN devices are not visible

< Wi-Fi Routers

LAN devices are not visible

403_Forbidden

2024-08-01 09:12:32 - last edited 2024-09-02 01:29:13

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-08-01

LAN devices are not visible

2024-08-01 09:12:32 - last edited 2024-09-02 01:29:13

Tags: #Device Isolation

Model: Archer C50

Hardware Version: V6

Firmware Version: 0.9.1 0.4 v0001.0 Build 211108 Rel.33223n(4555)

Devices on LAN are not visible to each other. For instance my printer is not visible to the computer. Similarly my TV is not visible to my phone to Chromecast. They work fine when I connect them to my old router. The enable client isolation box is also unchecked. It is in wireless router modem if that helps. Also I can only access the admin page via tplinkwifi.net not via 192.168.0.1. What could be causing this issue ? Any advice is greatly appreciated.

1 Accepted Solution

Marvin_S

2024-08-02 08:56:19 - last edited 2024-09-02 01:29:13

Posts: 1709

Helpful: 126

Solutions: 192

Stories: 0

Registered: 2022-05-09

Re:LAN devices are not visible -Solution

2024-08-02 08:56:19 - last edited 2024-09-02 01:29:13

@403_Forbidden

Hi, thanks for posting question here.

If the C50 router is newly set up recently, did you remove the wireless connection and reconnect on all your devices?

And you may check your network topology, the default LAN IP address may be not 192.168.0.1 anymore, so you failed to access the web UI via this IP.

It is also suggested to update firmware to the latest.

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.

Recommended Solution

1 Reply

Marvin_S

2024-08-02 08:56:19 - last edited 2024-09-02 01:29:13

Posts: 1709

Helpful: 126

Solutions: 192

Stories: 0

Registered: 2022-05-09

Re:LAN devices are not visible -Solution

2024-08-02 08:56:19 - last edited 2024-09-02 01:29:13

@403_Forbidden

Hi, thanks for posting question here.

If the C50 router is newly set up recently, did you remove the wireless connection and reconnect on all your devices?

And you may check your network topology, the default LAN IP address may be not 192.168.0.1 anymore, so you failed to access the web UI via this IP.

It is also suggested to update firmware to the latest.

LAN devices are not visible

LAN devices are not visible

Information

Voters 0

Tags