Home

Forums

Stories

Knowledge Base

TP-Link Community > Tapo Smart Plug > Tapo P100 Smart Plug not showing Costing at all.

< Tapo Smart Plug

Tapo P100 Smart Plug not showing Costing at all.

Jack50au

2024-08-02 01:10:18 - last edited 2024-09-09 03:40:02

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-08-02

Tapo P100 Smart Plug not showing Costing at all.

2024-08-02 01:10:18 - last edited 2024-09-09 03:40:02

Tags: #Energy Monitoring

Model: Tapo P110

Hardware Version: V1

Firmware Version: 1.3.0 Build 230905 rel.152200

Hi I bought a whole lot of these to monitor my energy usage/consumption. But l realized that the cost function is not working. It is always showing the same value for the day,month, year.

I just updated the app to the latest version (02/08/2024) with the latest firmware. Am l doing something wrong is is this bugged?

You can see from the month and the year pages the energy usage but the cost still stays the same. My cost is 34cents per kwh.

Month Total

Year total

1 Accepted Solution

Wayne-TP

2024-08-02 11:03:17 - last edited 2024-09-09 03:40:02

Posts: 3425

Helpful: 651

Solutions: 937

Stories: 12

Registered: 2020-06-23

Re:Tapo P100 Smart Plug not showing Costing at all.-Solution

2024-08-02 11:03:17 - last edited 2024-09-09 03:40:02

@Jack50au

The new electricity rate will only be applied to the new-generated energy consumption (kWh) afterwards, the previous data still use the old electricity rate.

If the electricity rate has been changed, the formula to calculate your electricity bill is :
Cost = (kilowatt-hours) x (Old electricity rate)+ (kilowatt-hours) x ( New electricity rate)

BTW, the device model should be a Tapo P110 or P115. The P100 does not support energy monitoring feature.

▶ Landscape Mode - Tapo App for Pad ▶ Share Your Pet Story. Win Free Tapo Care! ▶ Smart Action 2.0 Explore and meet the next level home automation.

Recommended Solution

1 Reply

Wayne-TP

2024-08-02 11:03:17 - last edited 2024-09-09 03:40:02

Posts: 3425

Helpful: 651

Solutions: 937

Stories: 12

Registered: 2020-06-23

Re:Tapo P100 Smart Plug not showing Costing at all.-Solution

2024-08-02 11:03:17 - last edited 2024-09-09 03:40:02

@Jack50au

The new electricity rate will only be applied to the new-generated energy consumption (kWh) afterwards, the previous data still use the old electricity rate.

If the electricity rate has been changed, the formula to calculate your electricity bill is :
Cost = (kilowatt-hours) x (Old electricity rate)+ (kilowatt-hours) x ( New electricity rate)

BTW, the device model should be a Tapo P110 or P115. The P100 does not support energy monitoring feature.

▶ Landscape Mode - Tapo App for Pad ▶ Share Your Pet Story. Win Free Tapo Care! ▶ Smart Action 2.0 Explore and meet the next level home automation.

Tapo P100 Smart Plug not showing Costing at all.

Tapo P100 Smart Plug not showing Costing at all.

Information

Voters 0

Tags