Deco X10 and Bandwidth

Deco X10 and Bandwidth

Deco X10 and Bandwidth
Deco X10 and Bandwidth
2024-08-03 05:54:03 - last edited 2024-08-03 06:20:04
Model: Deco X10  
Hardware Version: V1
Firmware Version: 1.06

Hi

 

Hope you are having a good day.

 

Recently got the new X10 mesh system and am having some trouble.

 

One feature I would ask for is being able to control signal strength and mhz. 2.4 Ghz is an absolute mess in my situation. I live in a crowded space and the system always uses 40mhz. Almost unusable. In my older routers I could use 20mhz on Channel 1 and not face any problems. Network optimization does not help.

 

Please also let us turn off bandwidth control as there are situations when it is absolutely necessary. For instance in my case, my raw internet speed is 40 mbps while cache speed is 100mbps. In my older router, I could just turn qos on/off when the network became unstable.

 

There also seems to be a problem with the app not showing bandwidth usage of devices connected to the satellite unit. I have the deco devices connected through Ethernet.

  0      
  0      
#1
Options
2 Reply
Re:Deco X10 and Bandwidth
2024-08-05 07:57:59 - last edited 2024-08-05 08:00:40

  @Mushroom123 

Hi

 

If you cannot find the option to disable QoS, you could go to Deco APP > more > QoS to set it to standard or remove all priority devices.
Regarding the 2.4G channel width selection and satellite Deco's devices bandwidth you mentioned, I will provide feedback to the relevant departments for evaluation. Thank you very much for your feedback.
Warm regards.

  0  
  0  
#2
Options
Re:Deco X10 and Bandwidth
2024-08-05 12:03:33
Thanks for the reply. How do we set qos to standard? I cant seem to find the option.
  0  
  0  
#3
Options