NVR go2rtc stream makes 2.4GHz network unstable

NVR go2rtc stream makes 2.4GHz network unstable

NVR go2rtc stream makes 2.4GHz network unstable
NVR go2rtc stream makes 2.4GHz network unstable
2024-08-10 03:54:26 - last edited 2024-08-20 09:32:58
Model: Deco XE75 Pro  
Hardware Version:
Firmware Version: 1.2.10

Model: DecoXE75 Pro

 

Hello.

 

I have 3 Deco XE75 Pro's and around 45 devices connected to my network, many of which are 2.4ghz devices.

 

I have 5 ip KASA Cam wireless cameras around my house, and now wanted to add a NVR to record those cameras, but when i connect my nvr (frigate), specifically with go2rtc stream setup, MANY IoT devices disconnect every 2 - 5 minutes or so (TP link smart outlets, ESP32 devices, etc). Within 1 minute of the container starting, devices begin to disconnect. Within 10 secs of the containers stopping, all devices come back online and stay connected. I use Home Assistant and really want 100% up-time. Upgrading from Google Nest Wifi (Older generatrion) and had no issues with them.

 

Hope someone can help me cause I really can not understand it.

Thank you.

  1      
  1      
#1
Options
1 Accepted Solution
Re:NVR go2rtc stream makes 2.4GHz network unstable-Solution
2024-08-16 23:17:40 - last edited 2024-08-20 09:32:58

  @TheFalseReality I was given a soon-to-be-relieased firmware that seems to help with the 2.4GHz channels on the Deco devices. It played havoc with my Zigbee network as well, but after changing channels, the interferance seemed to be negliable. 

Recommended Solution
  1  
  1  
#4
Options
5 Reply
Re:NVR go2rtc stream makes 2.4GHz network unstable
2024-08-10 04:32:02

  @TheFalseReality 

Before this, I bought an Archer Router, same issue. I returned it for these Deco units.

  1  
  1  
#2
Options
Re:NVR go2rtc stream makes 2.4GHz network unstable
2024-08-12 07:15:25

  @TheFalseReality 

Hi, Thanks for the feedback.

I noticed you also submitted a support ticket earlier.

For the current feedback, I'd like to escalate your case to the senior engineers for further assistance.

Please check the email later for more suggestions.

Best regards.

  1  
  1  
#3
Options
Re:NVR go2rtc stream makes 2.4GHz network unstable-Solution
2024-08-16 23:17:40 - last edited 2024-08-20 09:32:58

  @TheFalseReality I was given a soon-to-be-relieased firmware that seems to help with the 2.4GHz channels on the Deco devices. It played havoc with my Zigbee network as well, but after changing channels, the interferance seemed to be negliable. 

Recommended Solution
  1  
  1  
#4
Options
Re:NVR go2rtc stream makes 2.4GHz network unstable
2024-08-19 15:05:17

  @TheFalseReality 

connecting cameras via wifi is a very bad idea

if you want stability use ethernet cable

also in the 2.4GHZ range everything is very bad with the air, and even a switched on microwave oven can completely lower this wireless range

for clients use 5GHZ, for TVs, cameras - ethernet cable and then there will be no problems

  1  
  1  
#5
Options
Re:NVR go2rtc stream makes 2.4GHz network unstable
2024-08-19 23:36:31

  @Godlike66 

Yes from now on, since I want to have a robust Frigate NVR system, I will look into wried cameras for that purpose

  1  
  1  
#6
Options

Information

Helpful: 1

Views: 185

Replies: 5

Related Articles