Camera Speaker Volume very low

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Camera Speaker Volume very low

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Camera Speaker Volume very low
Camera Speaker Volume very low
2024-08-11 06:30:46 - last edited 2024-08-22 09:43:33
Model: Tapo C220  
Hardware Version: V1
Firmware Version: 1.1.9 build 240223 rel.56143n

Hi Team,

 

We use talk/call option the volume from mobile to Camera, the volume in camera is very low and the people in remote is unable hear me properly. But i can able to hear them proporly.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Camera Speaker Volume very low-Solution
2024-08-13 01:54:23 - last edited 2024-08-22 09:43:33

  @Umesh_Kumar 

 

When using Tapo camera's Talk or Voice Call feature, make sure to check the camera speaker and microphone volume. In your case, check whether the speaker volume is low.

 

If there is no sound or low volume from the camera when speaking from the camera, check how the camera alarm sounds when detecting movements. *Do forget to turn on camera motion detection and (sound) alarm before the testing.

 

It's important to note that the volume effect of the camera's speaker can vary depending on the installation environment. For example, when installed in an indoor, relatively small space, the sound will appear louder. If installed in an open outdoor environment, the same volume level will sound softer compared to indoors. The ambient noise in the outdoor environment can also impact the perceived volume.

 

Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual ModesTapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Camera Speaker Volume very low-Solution
2024-08-13 01:54:23 - last edited 2024-08-22 09:43:33

  @Umesh_Kumar 

 

When using Tapo camera's Talk or Voice Call feature, make sure to check the camera speaker and microphone volume. In your case, check whether the speaker volume is low.

 

If there is no sound or low volume from the camera when speaking from the camera, check how the camera alarm sounds when detecting movements. *Do forget to turn on camera motion detection and (sound) alarm before the testing.

 

It's important to note that the volume effect of the camera's speaker can vary depending on the installation environment. For example, when installed in an indoor, relatively small space, the sound will appear louder. If installed in an open outdoor environment, the same volume level will sound softer compared to indoors. The ambient noise in the outdoor environment can also impact the perceived volume.

 

Tapo P110M Matter 1.3 Release Energy Monitoring through Matter ▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ First Smart Switch Module! Tapo S112 Smart Switch Module with Roller and Switch Dual ModesTapo Camera Image Style & Image Brightness Try out a different image style for your camera!
Recommended Solution
  0  
  0  
#2
Options