@бенджамин24 

Hello. I have the same problem. 2 X50-PoE connected to TP-link TL-SG1008P switch. Internet speed is normal, but quite often both X50-PoE reboot. How to solve the problem?

  @David-TP 

Hi David thanks for the reply actually today I've had the decos resetting about every 10 min or so going solid red then 2 or so min later going green. I've changed the sg105pe auto poe recovery to enable and that has not fixed the problem also I've changed at seperate times the dhcp to disable on the sg105pe and also the vx220 but still the problem remains, then I thought it may be a power issue so I disconnected one of the decos and still the problem keeps happening

*EDIT* to answer your question - yes i have the sg105pe running all 3 deco's and no other devices are connected

  @David-TP 

Reboots 4-5 times per hour. TP-link TL-SG1008P switch. Connected via CAT6 cable -2 X50-PoE + IP PoE CCTV camera https://aliexpress ru/item/1005004881016677.html. But the problem occurred before installing the camera. The camera does not fail. Both X50-PoE lights up red at once and after ~ 2 minutes lights up green and the connection is restored. In the DECO application, during the initial setup, it showed a wired connection, but at some point it became wireless. And so it remained. All the latest updates are installed. The equipment is new and gives unstable operation out of the box. What to do? Judging by the forum, I am not the only one with this problem.

  @CIIayHeHoK 

Unfortunately i feel like i have the same problem straight out of the box, red lights daily and constantly. all TPlink gear so i would have thought 100% compatibillity 

  @benjamin24 @David-TP 

Hello. It seems I found the reason. First, I swapped the Primary and Secondary X50-PoE and only the secondary one started rebooting, I realized that the problem was in it. I decided to change the cable from the socket to the X50-PoE, it seems to not reboot and now the application shows a connection via a wire, and not via Wi-Fi as it showed before. It's strange, but the cable makes calls perfectly and all 8 wires had a clear signal. 2 days of normal flight. I'll observe.

  @David-TP 

Hi David, I did receive your email, I sent the logs back to you straight away via replying to the email, yep still having trouble after I've reset and swapped the decos and also have only 2 running (trying to see if it was a power issue)

To answer your original question the 3 decos are the only thing plugged into the switch apart from the link to the router there's no other poe devices on there.

The links are showing connected by ethernet.

Still getting red lights daily

  @David-TP 

Hi David,

I have the same problem. 

Cant send the whole problem, get a a fault with note that i'm including a forbidden link