Change of network for AV1000 Powerline adapters

Change of network for AV1000 Powerline adapters

Change of network for AV1000 Powerline adapters
Change of network for AV1000 Powerline adapters
2024-08-16 12:02:16

Hi, i have a set of 3 powerline adapters av1000.

They are working brillantly and they are connected to my router.

I tried to change the internet network that is currently feeding them and apparently they were not able to recognize the new network.

Do you know if i need to re-run the pairing process or do the reset when changing the network?

Maybe a stupid question but i would like to avoid screwing up a system that is working quite well.

 

Thanks

 

  0      
  0      
#1
Options
1 Reply
Re:Change of network for AV1000 Powerline adapters
2024-08-17 16:51:07

  @Gianma 

 

Normally they should adapt to the new network on their own, at least the one's that have no Wi-Fi built in. Powerline adapters with built-in Wi-Fi (TL-WPA...) that were assigned "static" IP addresses would likely need to be reconfigured.

 

Anyway, unplug all Powerline adapters from their wall sockets for a moment and then plug them back in again. That should be enough, in case they haven't already adjusted themselves over night.

 

  0  
  0  
#2
Options