TL-WA1201 VLAN of management interface

TL-WA1201 VLAN of management interface

TL-WA1201 VLAN of management interface
TL-WA1201 VLAN of management interface
2024-08-22 16:41:19
Model: TL-WA1201  
Hardware Version: V3
Firmware Version: 1.10.33 Build 240115 Rel.65252n(4555)

Hi,

 

I have a TL-WA1201 running in multi-ssid mode. When I assign the VLANs to the SSIDs, i can no longer connect or ping the access point. I suspect that the acces point DHCP client and web management interface remain in non-vlan network. Assigning VLAN 1 to a SSID makes it non-VLAN and thus that works. However, that is not ideal for me.

 

I do not see any option to put the management interface and the dhcp client in a VLAN in the manual nor on the web interface. Is this not possible?

  0      
  0      
#1
Options
2 Reply
Re:TL-WA1201 VLAN of management interface
2024-08-22 20:05:48 - last edited 2024-08-22 21:19:59

  @BunnyMeow 

 

Management interface is always in VLAN 1.

So if you want to manage the TL-WA1201 do this from a device connected to your main router or create a management SSID like this:

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:TL-WA1201 VLAN of management interface
2024-08-24 18:33:12

  @terziyski Hi, Thanks for your reply.

 

VLAN 1 is untagged in the access point. I have used this and then use my managed switch to "reinsert" the trafic back into the correct VLAN. This works for now :).

  0  
  0  
#3
Options