DECO XE 75 pro and TL-WA850RE not working together

DECO XE 75 pro and TL-WA850RE not working together

DECO XE 75 pro and TL-WA850RE not working together
DECO XE 75 pro and TL-WA850RE not working together
2024-08-31 17:30:47
Model: Deco XE75 Pro   TL-WA850RE  
Hardware Version: V1
Firmware Version: 1.2.11 Build 2024024

3 Deco's E75 pro working OK, after connectin one WA850RE as a client via 2,4 network is unstable - wifi devices are working well (5ghz mainly) LAN clients are not working - problems with getting ip address, dns is not resolving names or just generale failure of network. 

 

Setup


DECO1 - main router

DECO2 - station

DECO3 - station

WA850RE - client using deco's 2,4 wifi

lan device connected to WA850RE lan port. 

 

The end device connected to WA850RE is working like a charm...

 

If i poweroff the WA850RE everything is working OK, the same when i block the devices in the deco app. 

 

Any ideas if such configuration should work? 

Double checked the ip address of the wa850re lan device and it's in good subnet, no ip conflict etc. 

 

 

  0      
  0      
#1
Options
2 Reply
Re:DECO XE 75 pro and TL-WA850RE not working together
2024-09-02 08:30:00

  @JacekKa 

Hi,

 

Will the devices have the same issue when directly connected to the Deco LAN ports?

 

Please change the DNS settings on the Deco.

And you can also test if set up an address reservation can help.

How to configure Address Reservation on a Deco

 

If the issue still exists, please also provide the error message when the issue occurs.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:DECO XE 75 pro and TL-WA850RE not working together
2024-09-06 07:58:41

  @Sunshine 

the end device is set to fixed ip, 192.168.5.x, deco mainstsyion is 192.168.5.1, but the sub stations are 192.168.4.1.... what do you mean adding a fixed reservation? For WL repeater device? As you probably know MAC address of end device is not available for reservation via wifi

  0  
  0  
#3
Options