Do not find the mcc mnc for the imsi 340041000000659
Do not find the mcc mnc for the imsi 340041000000659
Hello,
My ISP is Free caraïbe 340 04
This error was found in my system log associated to a major internet connection instability:
Do not find the mcc mnc for the imsi 340041000000659
This error occurred after upgrading the firmware to 1.6.0 and ISP file to 24071201
I downgraded the firmware to 1.3.0 but the ISP file remain the same.
I haven't this problem before (I had but with another operator and was solved by changing the operator)
When I search manually the network, the router do not recognise my ISP and show it in numbers 340 4.
The log shows every 15sec:
4 2024-09-23 17:42:28 4G Information ERROR: Do not find the mcc mnc for the imsi 340041000000659
5 2024-09-23 17:42:28 4G Information ERROR: Unsupport PLMN, cannot find the section.
6 2024-09-23 17:42:28 4G Information ERROR: Unsupport PLMN, cannot find the section.
7 2024-09-23 17:42:13 4G Information USER: no need to init device sca
So, can we edit the ISP file to add my network, can we do something to delete this error???!
I am really tired with this router.
Thanks
Please help me and don not reply to my post with we can not and send us the log.
The problem is only these messages that appear in logs
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, thanks for posting question here.
To assist you efficiently, I've forwarded your case to the TP-Link support engineers who will contact you with your registered email address later. Please pay attention to your email box for follow-up.
- Copy Link
- Report Inappropriate Content
Hello Nbl1,
I have a similar error with my new TL-MR100.
Firmware Version:1.6.0 0.9.1 v0001.0 Build 240715 Rel.42657n Hardware Version:TL-MR100 v3.0 00000002
My provider is WinSim.
I've enter some APN configs, but it will not connect.
- APN: internet
- APN: web.vodafone . de
- APN: internet . telekom
Sometime the router is very lazzy, if I remove the SIM, the Webfrontend is normal.
Did you have received a solution?
The following messages are written in the log-file every 20-30sec.
2018-10-01 00:18:27 [6] 4G: ERROR: [NAT CFG ]SetNatCfg!!!
2018-10-01 00:18:41 [6] 4G: ERROR: updateLTE_ISP_File.
2018-10-01 00:18:41 [6] 4G: ERROR: Init raw table success.
2018-10-01 00:18:41 [6] 4G: ERROR: New sms count is 0
2018-10-01 00:18:41 [6] 4G: USER: sgj Enter getAtComDev in INCLUDE_FUNC_AUTOPORT
2018-10-01 00:18:42 [6] 4G: USER: sgj use /dev/ttyUSB1 to send at cmd
2018-10-01 00:18:43 [6] 4G: ERROR: Unsupport PLMN, cannot find the section.
2018-10-01 00:18:43 [6] 4G: ERROR: Unsupport PLMN, cannot find the section.
2018-10-01 00:18:43 [6] 4G: ERROR: Do not find the mcc mnc for the imsi 262231016401857
2018-10-01 00:18:43 [6] 4G: ERROR: Sim Response Error!
2018-10-01 00:18:43 [6] 4G: WARN: Get SCA fails. CMS ERROR, errno is 500
2018-10-01 00:18:44 [6] 4G: USER: Now will Clear ESM Info.
2018-10-01 00:18:44 [6] 4G: ERROR: SetModemMode mode=0
2018-10-01 00:18:44 [6] 4G: WARN: SET DDR CLK to 1066
2018-10-01 00:18:44 [6] 4G: USER: Close SIM write
2018-10-01 00:18:44 [6] 4G: ERROR: [band scan] DM band_support_mask: 0x1a0000800d5
2018-10-01 00:18:44 [6] 4G: ERROR: [band scan] DM lte_category = 4.
2018-10-01 00:18:44 [6] 4G: ERROR: [band scan] band sel mode is auto. band: 0x1a0000800d5
2018-10-01 00:18:44 [6] 4G: ERROR: Now will set band sel to 0x1a0000800d5.
2018-10-01 00:18:44 [6] 4G: ERROR: [band scan] band mask = 0x1a0000800d5
2018-10-01 00:18:44 [6] 4G: ERROR: [band scan] get band_support_mask = 0x1a0000800d5
2018-10-01 00:18:44 [6] 4G: ERROR: ..SetSimHotSwap..
- Copy Link
- Report Inappropriate Content
I have the same problem. At the begining it works well but after some period it doesn't work.
| ERROR: Do not find the mcc mnc for the imsi |
Firmware Version:
1.8.0 0.9.1 v0001.0 Build 240507 Rel.41141n
Hardware Version:
Archer MR500 v1.0 00000003
Module version:
16121.1009.00.01.02.12
APN: cytamobile
- Copy Link
- Report Inappropriate Content
Hello,
I think, your and my provider or the used 4G network isn't supported.
My solution:
I insert an other SIM and it works fine.
Fast and stabil.
Good luck.
- Copy Link
- Report Inappropriate Content
I have the same problem. Would be nice if you post a solution.
Hints like "someone will send you a message" does not really help other persons!!
And sorry but I can not just change the provider. I have a contract and will not throw it away. It costs money!
Thanks for a solution!
- Copy Link
- Report Inappropriate Content
Hello,
in my case it does not work with the provider WinSim, used network "1&1 5G Netz".
So I give the SIM back to the provider. This does not work in my area, location Harz/ Germany.
I found an other solution, back to the wired network.
Sorry, no solution for you.
- Copy Link
- Report Inappropriate Content
Thank you for your answer. My provider is the same yours: Drillisch.
But I use 4G.
So noone from TP helps? What a perfect support.
Seems to be the last time that I bought these products. Really bad!!!
- Copy Link
- Report Inappropriate Content
@Nbl1 gibt es bereits eine Lösung?
- Copy Link
- Report Inappropriate Content
@Marvin_S gibt es bereits eine Lösung?
- Copy Link
- Report Inappropriate Content
Hi, may I confirm some basic information to understand your needs better?
1. What is the model, hardware and firmware version of your 4G router?
2. Who is the ISP of your sim card?
3. What is the exact problem?
4. Please share the screenshot of the page if you find "Do not find the mcc mnc for the imsi 340041000000659" in the router log as well.
Thanks for your cooperation and best regards.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1359
Replies: 11
Voters 0
No one has voted for it yet.