IOT and binding IOT devices to particular emitter

IOT and binding IOT devices to particular emitter

IOT and binding IOT devices to particular emitter
IOT and binding IOT devices to particular emitter
2024-10-07 07:56:28 - last edited 2 weeks ago
Model: Archer AX55  
Hardware Version: V1
Firmware Version: 1.3.3 build 20240628 rel37017

Hi

I have 2 requests - my setup is an Archer AX55 (v1) connected to my bridged ISP router with a RE605X (firmware 1.0.3 build 20230907 rel 38400) being used to extend the coverage to some of my IOT devices

First
can the IOT network please be 'meshed' - I am having to use my main wireless network as that's the only way I can extend coverage to those IOT devices furthest from my main router

Second
can devices be locked (bound) to a particular emitter
I have found that the RE605X is being used for some devices where the signal is worse - here's an example - I have some lights on an outdoor shed - when they are connected via the main router I get a signal strength of -68dBM and when connected via the RE605X the signal strength is -74dBm but I have no way to force this device to use the stronger signal and its using the poorer signal

  0      
  0      
#1
Options
1 Accepted Solution
Re:IOT and binding IOT devices to particular emitter-Solution
2024-10-10 03:45:52 - last edited 2 weeks ago

  @dhbar 

 

Hi, thanks for posting question here.

1. Sorry, no, IoT network can not be meshed under Onemesh or Easymesh network.

2. Sorry, no, it does not support to choose signal source for Onemesh network. You may take address reservation address reservation for a try.

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:IOT and binding IOT devices to particular emitter-Solution
2024-10-10 03:45:52 - last edited 2 weeks ago

  @dhbar 

 

Hi, thanks for posting question here.

1. Sorry, no, IoT network can not be meshed under Onemesh or Easymesh network.

2. Sorry, no, it does not support to choose signal source for Onemesh network. You may take address reservation address reservation for a try.

Recommended Solution
  0  
  0  
#2
Options