GE800 Router Only Recognizing 2.5G GPON as 1000Mbps Full Duplex
|
Hello TP-Link Community, |
|
I'm seeking assistance with an issue l've encountered while setting up my TP-Link GE800 router with a 2.5G GPON module. |
|
|
|
Setup Overview:
|
|
Steps Taken:
|
|
Request for Assistance: To assist with troubleshooting, l'm happy to share the EEPROM bin file of the GPON module for review. Please let me know if this helps diagnose the issue or if there are any specific settings or configurations needed to enable 2.5Gbps Full Duplex. Thank you in advance for your help! |
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I'm reaching out to inform you that our development team has provided beta firmware to allow you to modify the port settings, which should help resolve the speed negotiation issue you're experiencing. Please check the following thread for more details:
GPON ONU Only Negotiate at 1Gbps with Archer BE800/BE900/GE800 V1 10Gbps SFP+ Combo Port
- Copy Link
- Report Inappropriate Content
Hi, thanks for posting question here.
Please share the model of your 2.5G GPON module, then the senior support will take further confirmation~
- Copy Link
- Report Inappropriate Content
@Marvin_S hi, thanks for the reply. I would be happily to share the EEPROM.bin file. To that end, suggest your senior support to contact me. Thanks
- Copy Link
- Report Inappropriate Content
Hi, we need your cooperation to tell your ISP and the model of your 2.5G GPON module first. Thank you~
You may refer to this thread if you are not sure what model means.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@CaptainKool my ISP is TM Unifi as mentioned earlier in my post
- Copy Link
- Report Inappropriate Content
Hi, thanks for your update.
Sorry that I failed to find the model of your 2.5GHz GPON module, could you please check again? Usually you can find it on the label of the device itself.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi, thanks for your cooperation~
To assist you efficiently, I've forwarded your case to the TP-Link support engineers who will contact you with your registered email address later. Please pay attention to your email box for follow-up.
- Copy Link
- Report Inappropriate Content
@CaptainKool
Nice to see that you got the XM60A.
Could you please be so kind and share the OMCI MEs 7,256 and 257?
I want to see, if it is white listed at "Deutsche Glasfaser"
THANKS!
- Copy Link
- Report Inappropriate Content
I'm reaching out to inform you that our development team has provided beta firmware to allow you to modify the port settings, which should help resolve the speed negotiation issue you're experiencing. Please check the following thread for more details:
GPON ONU Only Negotiate at 1Gbps with Archer BE800/BE900/GE800 V1 10Gbps SFP+ Combo Port
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 368
Replies: 10
Voters 0
No one has voted for it yet.