Official Release Deco BE85_1.1.1 Supports WireGuard VPN,Channel Selection and Matter
This Article Applied to:
Deco BE85_V1/V2
Modifications and Bug Fixes:
1. Added Wireguard VPN feature.
2. Added Matter feature.
3. Added Channel Selection feature.
4. Added to the option to enable/disable 2.4GHz Backhaul Mode.
5. Improved stability and security of the system.
6. Improved the HomeShield features.
7. Fixed the issue that satellite units might be displayed as "offline" in Deco APP if there are lots of Tapo devices in the network.
8. Fixed the issue that the Guest wireless may be unable to access the Internet in some cases.
9. Fixed the issue where the monthly report statistics were inaccurate in certain cases.
10. Fixed the issue where the IPv6 Internet connection page would display empty in certain cases.
11. Fixed the issue where SafeSearch would deadlock in some scenarios.
12. Fixed the known issues that led to the crash and auto-reboot on the Deco side.
13. Fixed the issue that some IOS devices fail to connect to wireless in certain cases.
Firmware Download Link:
| Deco BE85_V1/V2 | Deco BE85_V2_1.1.1_241023.zip |
Update Advice:
1. Please make sure the Deco APP is up-to-date.
2. How to manually update the firmware via web UI- How to Update the Firmware of Deco.
3. The firmware downgrade needs to be through Firmware Recovery - How to Downgrade Deco.
Hi David.
I just updated to the new 1.1.1 and the VPN feature has disappeared from the menu.
Same thing when I go to the details screen, it does not show up.
Just to be sure, it does not show up in Deco Labs either.
I am attaching a screenshot.
This is a guess, but may be due to the fact that I purchased and use BE85 in Japan and use V6 Plus for my internet connection type.
1.Products purchased in Taiwan have also updated this firmware, but from time to time the main DECO is disconnected!? I don’t know why?? Is it caused by disabling 2.4G backhaul BUG?
Or is it caused by an incompatibility between the APP version and the firmware?
2.This version of the firmware is very unstable.
The APP keeps showing abnormal training messages of DECO disconnection (the line is confirmed to be OK...).
Can it be corrected and updated as soon as possible? TKS
3.After updating the firmware on the WEB setting page,
the login time is too short and the message "Re-login" is displayed.
Is there an option to set the login time?
4.The channel selection function cannot be used!? It can only be preset automatically??
5.What factors cause Memory Usage to be too high?
The system message is as follows
Sun Nov 17 11:00:05 2024 daemon.err nrd[30536]: netdb_requestDownlinkRSSI: not MLD!
Sun Nov 17 11:00:05 2024 daemon.err nrd[30536]: wlanifBSteerEventsHandleBeaconReport: Can't find local reported BSS on band of channel 0 for BSS 00:00:00:00:00:00
Sun Nov 17 11:00:08 2024 daemon.err nrd[30536]: estimatorDot11kIterateCB: Timeout waiting for 802.11k response from 9E:B8:09:9F:FD:8E
Sun Nov 17 11:00:14 2024 daemon.err nrd[30536]: wlanifMapToPhyMode: Invalid PHY mode from driver: 0
Sun Nov 17 11:00:14 2024 daemon.err nrd[30536]: wlanifConvertToSingleStreamMCSIndex: Invalid PHY mode from driver: 0
Sun Nov 17 11:00:14 2024 daemon.err nrd[30536]: wlanifMapToPhyMode: Invalid PHY mode from driver: 0
Sun Nov 17 11:00:14 2024 daemon.err nrd[30536]: wlanifConvertToSingleStreamMCSIndex: Invalid PHY mode from driver: 0
Sun Nov 17 11:00:14 2024 daemon.err nrd[30536]: wlanifMapToPhyMode: Invalid PHY mode from driver: 0
Sun Nov 17 11:00:14 2024 daemon.err nrd[30536]: wlanifConvertToSingleStreamMCSIndex: Invalid PHY mode from driver: 0
Sun Nov 17 11:00:14 2024 daemon.err nrd[30536]: netdb_requestDownlinkRSSI: not MLD!
Sun Nov 17 11:00:14 2024 daemon.err nrd[30536]: wlanifBSteerEventsHandleBeaconReport: Can't find local reported BSS on band of channel 0 for BSS 00:00:00:00:00:00
Sun Nov 17 11:00:17 2024 daemon.err nrd[30536]: estimatorDot11kIterateCB: Timeout waiting for 802.11k response from 9E:B8:09:9F:FD:8E
Sun Nov 17 11:00:23 2024 daemon.err nrd[30536]: triggerMonSteering: Failed to get uplink rssi for 9E:B8:09:9F:FD:8E
Sun Nov 17 11:00:25 2024 daemon.err nrd[30536]: netdb_requestDownlinkRSSI: not MLD!
Sun Nov 17 11:00:25 2024 daemon.err nrd[30536]: wlanifBSteerEventsHandleBeaconReport: Can't find local reported BSS on band of channel 0 for BSS 00:00:00:00:00:00
Sun Nov 17 11:00:03 2024 daemon.notice netifd: internet (18146): len < 0
Sun Nov 17 11:00:04 2024 daemon.err nrd[30536]: triggerMonSteering: Failed to get uplink rssi for 9E:B8:09:9F:FD:8E
Sun Nov 17 11:00:05 2024 daemon.notice nrd[30536]: prefer band set:0x6, bss channel:5
Sun Nov 17 11:00:05 2024 daemon.notice nrd[30536]: prefer band set:0x6, bss channel:48
Sun Nov 17 11:00:05 2024 daemon.notice nrd[30536]: nr_get_mesh_channel : channel_2g:2 .
Sun Nov 17 11:00:05 2024 daemon.notice nrd[30536]: nr_get_mesh_channel : channel_2g:10 .
Sun Nov 17 11:00:05 2024 daemon.notice nrd[30536]: nr_get_mesh_channel : channel_2g:6 .
Sun Nov 17 11:00:05 2024 daemon.notice nrd[30536]: nr_get_mesh_channel : channel_2g:5 .
Sun Nov 17 11:00:05 2024 daemon.err nrd[30536]: netdb_requestDownlinkRSSI: not MLD!
Sun Nov 17 11:00:05 2024 daemon.notice nrd[30536]: estimatorPerformMeasurement: Do 11k measurement for 9E:B8:09:9F:FD:8E on channel 48 from serving BSS APId 255 ChanId 5 ESSId 2
Sun Nov 17 11:00:05 2024 daemon.err nrd[30536]: wlanifBSteerEventsHandleBeaconReport: Can't find local reported BSS on band of channel 0 for BSS 00:00:00:00:00:00
Sun Nov 17 11:00:08 2024 daemon.err nrd[30536]: estimatorDot11kIterateCB: Timeout waiting for 802.11k response from 9E:B8:09:9F:FD:8E
1. The system memory usage cannot be seen in the DECO APP.
I wonder if it is a problem with the Taiwan version of the APP!?
2. When editing channels under Deco APP>WiFi network,
it is true that there is only the automatic option, and other channels cannot be selected.
3. After repeated testing, it was found that when the APP shows disconnection,
the host still has a green light and the network is normal.
It seems that the APP has a bug that needs to be fixed, because after the update,
it often shows that DECO is disconnected and not connected,
and other DECO slaves It’s also not connected, I don’t know why!?
4.Do you need to set the WIFI to base station mode during wired return? I set it to router mode
